Capacitive humidity sensors based on large diameter porous alumina prepared by high current anodization

Authorsمحمد الماسی کاشی-عبد العلی رمضانی-حامد عباسیان -علی خیاطیان
JournalSENSOR ACTUAT A-PHYS
Presented byدانشگاه کاشان
Paper TypeFull Paper
Published At۲۰۱۲-۱۲-۰۱
Journal GradeISI
Journal TypeTypographic
Journal CountryIran, Islamic Republic Of
Journal IndexISI ,SCOPUS

Abstract

Humidity sensors based on nanoporous aluminum oxide are described. Accelerated mild anodization technique was employed to prepare ordered porous aluminum oxide templates in phosphoric acid electrolyte at 165 and 185 V, anodization voltages. Impedance spectroscopy was used to characterize sensitivity, response and recovery time of prepared sensors with pore diameters changing from 67 to 190 nm. Increasing the pores diameter to an optimum limit improved the sensing parameters of the prepared sensors. Sensitivity enhancement was accompanied with reduction of humidity sensing threshold to 30% RH at optimum condition. Their low response and recovery time, less than 5 and 0.5 s, respectively, categorize them as ultrafast or rapid sensors. Sensing properties is seen to reduce with reduce in aluminum purity while it improves with increase in the self ordering of alumina template. It is also found that increasing the anions percentage in the pores walls improves the sensing behavior.