نویسندگان | مریم خضری,بهرام رضایی,علی اکبر عبد الله زاده,Benjamin Wilson,مهدی مولایی نسب,Mari LUNDSTRÖM |
---|---|
نشریه | T NONFERR METAL SOC |
شماره صفحات | 545 |
شماره مجلد | 31 |
ضریب تاثیر (IF) | ثبت نشده |
نوع مقاله | Full Paper |
تاریخ انتشار | 2021-09-20 |
رتبه نشریه | علمی - پژوهشی |
نوع نشریه | الکترونیکی |
کشور محل چاپ | ایران |
نمایه نشریه | JCR |
چکیده مقاله
Cyclic voltammetry and potentiodynamic polarization analyses were utilized to investigate the mechanism and kinetics of glycine leaching reactions for chalcopyrite. The effects of pH (9−12), temperature (30−90 °C) and glycine concentration (0−2 mol/L) on corrosion current density, corrosion potential and cyclic voltammograms were investigated using chalcopyrite concentrate−carbon paste electrodes. Results showed that an increase in the glycine concentration from 0 to 2 mol/L led to an increased oxidation peak current density. Under the same conditions, corrosion current density was found to change from approximately 28 to 89 μA/cm2, whereas corrosion potential was decreased from −80 to −130 mV. Elevated temperatures enhanced the measured current densities up to 60 °C; however, above this level, current density was observed to decrease. A similar current density behavior was determined with pH. A pH change from 9 to 10.5 resulted in an increase in current density and pH higher than 10.5 gave rise to a reduced current density. In addition, the thermodynamic stability of copper and iron oxides was found to increase at higher temperatures.
tags: glycine; corrosion current density; corrosion potential; electrochemical behaior; chalcopyrite concentrate