1 | A functionalized duplex coating on CP-titanium for biomedical applications | Cheraghali, B., Ghasemi, H.M., Abedini, M., Yazdi, R | Surface and Coatings Technology | 2020 |
2 | Contributions of corrosion and erosion in the erosion-corrosion of Sanicro 28 | Shahali, H., Ghasemi, H.M., Abedini, M | Materials Chemistry and Physics | 2019 |
3 | Corrosion and material alterations of a CuZn38Pb3 brass under acoustic cavitation | Abedini, M., Reuter, F., Hanke, S | Ultrasonics Sonochemistry | 2019 |
4 | Corrosion behavior of Al-brass alloy during erosion-corrosion process: effects of jet velocity and sand concentration | M. Abedini, H.M. Ghasemi | Materials and Corrosion | 2016 |
5 | Effect of impact angle on the erosion–corrosion behavior of AISI420 stainless steel in 3.5 wt.% NaCl solution | M. Ranjbar, H.M. Ghasemi, M. Abedini | Journal of Tribology | 2015 |
6 | Effect of long time service exposure on microstructure and mechanical proper-ties of gas turbine vanes made of IN939 alloy | M.R. Jahangiri, M. Abedini | Materials & Design | 2014 |
7 | Effect of normal load and sliding distance on the wear behavior of NiTi alloy | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi | Tribology Transactions | 2012 |
8 | Effect of phase transformation on the mechanical and wear behavior of NiTi alloy | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi, R. Mahmudi | Journal of Engineering Materials and Technology | 2010 |
9 | Effects of aging treatments on the high temperature wear behavior of 60Nitinol alloy | J. Nasehi, H.M. Ghasemi, M. Abedini | Tribology Transactions | 2016 |
10 | Electrochemical Noise and Polarization Analyses on Corrosion of Al-Brass Alloy During Erosion-Corrosion | Abedini, M., Ghasemi, H.M | Journal of Bio- and Tribo-Corrosion | 2020 |
11 | Electrochemical noise and polarization analyses on corrosion of Al‑Brass alloy during erosion‑corrosion | Abedini, M., Ghasemi, H.M. | Journal of Bio- and Tribo-Corrosion | 2021 |
12 | Erosion and erosion-corrosion of Al-brass alloy: effects of jet velocity, sand concentration and impingement angle on surface roughness | M. Abedini, H.M. Ghasemi | Transactions of Nonferrous Metals Society of China | 2017 |
13 | Erosion-corrosion behavior of 316-SS in seawater simulated environment at various impingement angles | H.M. Ghasemi, M. Karimi, A. Pasha, M. Abedini | International Journal of Mechanical and Materials Engineering | 2011 |
14 | Functionally graded oxygen-containing coating on CP-titanium for bio-applications: characterization, biocompatibility and tribocorrosion behavior | Cheraghali, B., Ghasemi, H.M., Abedini, M., Yazdi, R. | Journal of Materials Research and Technology | 2022 |
15 | High temperature tribological behavior of NiTi alloy against 52100 steel and WC | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi | Materials Characterization | 2010 |
16 | In situ measurement of cavitation damage from single bubble collapse using high-speed chronoamperometry | Abedini, M., Hanke, S., Reuter, M | Ultrasonics Sonochemistry | 2023 |
17 | Influence of prior cold working on the tribological behavior of Cu-0.65 wt.%Cr alloy | Saeed Asadi Kouhanjani, Arman Zare-bidaki, Morteza Abedini, Nader Parvin | Journal of Alloys and Compounds | 2009 |
18 | Interplay between mechanical wear and electrochemical corrosion during tribocorrosion of oxygen diffusion layer on Ti‒6Al‒4V in PBS solution | Yazdi, R., Ghasemi, H.M., Abedini, M., Monshi, M | Applied Surface Science | 2020 |
19 | Mechanism of tribofilm formation on Ti6Al4V oxygen diffusion layer in a simulated body fluid | R. Yazdi, H.M. Ghasemi, M. Abedini, C. Wang, A. Neville | Journal of the Mechanical Behavior of Biomedical Materials | 2018 |
20 | Oxidation and hot corrosion behaviors of service-exposed and heat-treated gas turbine vanes made of IN939 alloy | M. Abedini, M.R. Jahangiri, P. Karimi | Oxidation of Metals | 2018 |