1 | Influence of prior cold working on the tribological behavior of Cu-0.65 wt.%Cr alloy | Saeed Asadi Kouhanjani, Arman Zare-bidaki, Morteza Abedini, Nader Parvin | Journal of Alloys and Compounds | 2009 |
2 | Tribological behavior of NiTi alloy in martensitic and austenitic states | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi | Materials & Design | 2009 |
3 | Effect of phase transformation on the mechanical and wear behavior of NiTi alloy | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi, R. Mahmudi | Journal of Engineering Materials and Technology | 2010 |
4 | High temperature tribological behavior of NiTi alloy against 52100 steel and WC | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi | Materials Characterization | 2010 |
5 | Self-Healing effect on the worn surface of NiTi shape memory alloy | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi | Materials Science and Technology | 2010 |
6 | Erosion-corrosion behavior of 316-SS in seawater simulated environment at various impingement angles | H.M. Ghasemi, M. Karimi, A. Pasha, M. Abedini | International Journal of Mechanical and Materials Engineering | 2011 |
7 | Tribological behavior of heat treated Ni-rich NiTi alloy | R. Aliasgarian, H.M. Ghasemi, M. Abedini | Journal of Tribology | 2011 |
8 | Effect of normal load and sliding distance on the wear behavior of NiTi alloy | M. Abedini, H.M. Ghasemi, M. Nili Ahmadabadi | Tribology Transactions | 2012 |
9 | Synergistic erosion–corrosion behavior of Al–brass alloy at various impingement angles | M. Abedini, H.M. Ghasemi | Wear | 2014 |
10 | Effect of long time service exposure on microstructure and mechanical proper-ties of gas turbine vanes made of IN939 alloy | M.R. Jahangiri, M. Abedini | Materials & Design | 2014 |
11 | Effect of impact angle on the erosion–corrosion behavior of AISI420 stainless steel in 3.5 wt.% NaCl solution | M. Ranjbar, H.M. Ghasemi, M. Abedini | Journal of Tribology | 2015 |
12 | Effects of aging treatments on the high temperature wear behavior of 60Nitinol alloy | J. Nasehi, H.M. Ghasemi, M. Abedini | Tribology Transactions | 2016 |
13 | Corrosion behavior of Al-brass alloy during erosion-corrosion process: effects of jet velocity and sand concentration | M. Abedini, H.M. Ghasemi | Materials and Corrosion | 2016 |
14 | Erosion and erosion-corrosion of Al-brass alloy: effects of jet velocity, sand concentration and impingement angle on surface roughness | M. Abedini, H.M. Ghasemi | Transactions of Nonferrous Metals Society of China | 2017 |
15 | The effect of vibration during friction stir welding on corrosion behavior, mechanical properties | S. Fouladi, A.H. Ghasemi, M. Abbasi, M. Abedini, A.M. Khorasani, I. Gibson | Metals | 2017 |
16 | Synergistic erosion-corrosion behavior of commercially pure titanium at various impingement angles | N. Khayatan, H.M. Ghasemi, M. Abedini | Wear | 2017 |
17 | Oxidation and hot corrosion behaviors of service-exposed and heat-treated gas turbine vanes made of IN939 alloy | M. Abedini, M.R. Jahangiri, P. Karimi | Oxidation of Metals | 2018 |
18 | Mechanism of tribofilm formation on Ti6Al4V oxygen diffusion layer in a simulated body fluid | R. Yazdi, H.M. Ghasemi, M. Abedini, C. Wang, A. Neville | Journal of the Mechanical Behavior of Biomedical Materials | 2018 |
19 | Study of erosion-corrosion and corrosion behavior of CP-Ti during slurry erosion | N. Khayatan, H.M. Ghasemi, M. Abedini | Journal of Tribology | 2018 |
20 | Corrosion and material alterations of a CuZn38Pb3 brass under acoustic cavitation | Abedini, M., Reuter, F., Hanke, S | Ultrasonics Sonochemistry | 2019 |