Fabricated CuO–ZnO/nanozeolite X heterostructure with enhanced photocatalytic performance: mechanism investigation and degradation pathway

Authorsمحسن بهپور,مریم کریمی شمس آبادی
JournalMATER SCI ENG B-ADV
Page number1
Volume number269
IFثبت نشده
Paper TypeFull Paper
Published At2021-04-15
Journal GradeScientific - research
Journal TypeElectronic
Journal CountryIran, Islamic Republic Of
Journal IndexSCOPUS

Abstract

ZnO-CuO/Nanozeolite X catalysts (ZC/ZXN), coated using different amounts of copper and zinc loading, were synthesized to enhance the photocatalytic activity ZnO in the photo-degradation of Methyl Orange (MO). The catalysts is characterized by XRD, FT-IR, DRS, SEM, and EIS techniques. Owing to the effective mole ratio of the semiconductors in the hybridized photocatalysts, the resulting showed the photo-catalyst containing 12.3 wt% CuO and 3.7 wt% ZnO/ZXN (ZC4/ZXN) can create excellent degradation ability. Mott–Schottky plot in (Na2SO4, 0.1 M) medium indicates p-n junction with a flat band potential of 0.56 and 1.26 eV Ag/AgCl for ZnO and CuO, respectively. EIS measurements showed the values of RCT 27.9 Ω for ZC4/ZXN. A lower charge transfer resistance of ZC4/ZXN is indicative of recombination suppression by improved charge transport to the solution. Response surface methodology (RSM) was selected for optimization and investigation of the combined variables and interaction effects. The quadratic model was well fitted to the experimental data (with values of 0.9824 and 0.9619 for R2 and R2adj). Based on the experimental design results, the photodegradation of MO was mostly affected by the variables of pH, catalyst dosage, initial dye concentration, and irradiation time, respectively. The degradation compounds formed during the photo-degradation process were analyzed by the GC–MS technique. During the degradation, MO was converted to benzene sulfonic acid, N, Ń-dimethyl-p-phenylenediamine, etc.

tags: Nanozeolite X ZnO-CuO/ZXN Photocatalytic degradation RSM Modeling