| نویسندگان | فهیمه زراعت کارکاشانی,سید مهدی قریشی,اسمائ خوبی |
| نشریه | MAT SCI ENG C-MATER |
| شماره صفحات | 45 |
| شماره مجلد | 94 |
| ضریب تاثیر (IF) | 5.08 |
| نوع مقاله | Full Paper |
| تاریخ انتشار | 2018-09-11 |
| رتبه نشریه | علمی - پژوهشی |
| نوع نشریه | الکترونیکی |
| کشور محل چاپ | ایران |
| نمایه نشریه | ISI |
چکیده مقاله
In this research, differential pulse voltammetry (DPV) coupled with experimental design, was used for de-termination ofp-hydroxybenzoic acid (PHB) in cosmetics. Optimization of effecting parameters was carried out
based on rotatable central composite design (RCCD) and response surface methodology (RSM) at the surface of a
nanostructured electrode for achieving the best sensitivity. Sol-gel process was used for synthesize of nickel
titanate (NiTiO3) nanoceramics. The structural and morphological characterization of the nanoparticles was
studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron mi-croscopy (SEM). Then the NiTiO3nanopowders were used for surface modification of a carbon paste modified
electrode (CPE). Surface characterization of the electrode was accomplished using SEM, electrochemical im-pedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques. Under the optimized conditions, the vol-tammograms exhibited two linear dynamic ranges of 0.7–80.0μM and 80.0–1000.0μM for PHB with the de-tection limit of 62.0 nM (S/N= 3). Finally the NiTiO3nanoceramics modified carbon paste electrode (NiTiO3/
CPE) could be employed for the determination of PHB in real samples with satisfactory results.