Aliakbar Abbasian Arani

Associate Professor

College:Faculty of Mechanical Engineering

Department:Mechanical Engineering - Heat and Fluid

Papers in Journals

Showing 1-20 of 90 items.

1. Ali Akbar Abbasian Arani, Hossein Aberoumand, Amin Jafarimoghaddam, Sadegh Aberoumand,Mixed convection heat transfer: an experimental study on Cu/heat transfer oil nanofluids inside annular tube,HEAT MASS TRANSFER,Vol. 53,pp. 2875–2884,2017.
2. Mohammad Hemmat Esfe, Mohammad Hadi Hajmohammad, Peyman Razi, Mohammad Reza Hassani Ahangar, Ali Akbar Abbasian Arani,The optimization of viscosity and thermal conductivity in hybrid nanoﬂuids prepared with magnetic nanocomposite of nanodiamond cobalt-oxide (ND-Co3O4) using NSGA-II and RSM,INT COMMUN HEAT MASS,Vol. 79,pp. 128-134,2016.
3. Ali Akbar Abbasian Arani, Siavash Gholami Ghale Nazeri,Effect of vortex generator on a wavy wall heat exchanger performance for turbulent nanofluid flow under a magnetic field,Amirkabir Journal of Mechanical Engineering,2019.
4. Ali Akbar Abbasian Arani, Ali Arefmanesh, Armin Emamifar,Analysis of heat transfer in a multilayer living tissue using the Galerkin weighted residuals method,Amirkabir Journal of Mechanical Engineering,2019.
5. Ali Akbar Abbasian Arani, Reza Moradi,Shell and tube heat exchanger optimization using new baffle and tube configuration,Applied Thermal Engineering,Vol. 157,2019.
6. M Rezaee, M Khoshvaght ,& Aliabadi, AA Abbasian Arani, SH Mazloumi,Heat transfer intensification in pin-fin heat sink by changing pin-length/longitudinal-pitch,Chemical Engineering and Processing-Process Intensification,Vol. 141,2019.
7. Ali Akbar Abbasian Arani, Ali Arefmanesh, Hamidreza Ehteram,Numerical optimization of obstructed high temperature heat exchanger for recovery from the flue gases by considering ash fouling characteristics,International Journal of Numerical Methods for Heat & Fluid Flow,2019.
8. Behrouz Mozafari, Ali Akbar Abbasian Arani, Ghanbar Ali Sheikhzadeh, Mahmoud Salimi,Brownian models effect on turbulent fluid flow and heat transfer and entropy generation of water/boehmite alumina nanofluid inside enclosure,International Journal of Numerical Methods for Heat & Fluid Flow,2019.
9. Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, Saeed Esfandeh, Masoud Afrand,Proposing new hybrid nano-engine oil for lubrication of internal combustion engines: Preventing cold start engine damages and saving energy,Energy,Vol. 170,pp. 228-238,2019.
10. Ali Akbar Abbasian Arani, Farhad Pourmoghadam,Experimental investigation of thermal conductivity behavior of MWCNTS-Al2O3/ethylene glycol hybrid Nanofluid: providing new thermal conductivity correlation,Heat and Mass Transfer,2019.
11. Ali Akbar Abbasian Arani, Farhad Monfaredi, Alireza Aghaei, Masoud Afrand, Ali J Chamkha, Hesamoddin Emami,Thermal radiation effect on the flow field and heat transfer of Co3O4-diamond/EG hybrid nanofluid using experimental data: A numerical study,The European Physical Journal Plus,pp. 1-13,2019.
12. Mohammad Rezaee, Morteza Khoshvaght ,& Aliabadi, Ali Akabr Abbasian Arani, Syead Hossein Mazloumi,Enhanced heat transfer in pin-fin heat sink working with nitrogen gas-water two-phase flow: Variable pin-length and longitudinal-pitch,Journal of Thermal Analysis and Calorimetry,2019.
13. Ali Akbar Abbasian Arani, Hamed Uosofvand,Improving shell and tube heat exchanger themohydraulic performance using combined baffle,International Journal of Numerical Methods for Heat & Fluid Flow,2019.
14. Farzad Pourfattah, Ali Akbar Abbasian Arani, Mohammad Reza Babaie, HM Nguyen, A Asadi,On the thermal characteristics of a manifold microchannel heat sink subjected to nanofluid using two-phase flow simulation,International Journal of Heat and Mass Transfer,Vol. 143,2019.
15. Ali Akbar Abbasian Arani, Mehrdad Kazemi,Analysis of fluid flow and heat transfer of nanofluid inside triangular enclosure equipped with rotational obstacle,Journal of Mechanical Science and Technology,Vol. 33,pp. 4917-4929,2019.
16. Mohammad Hemmat Esfe, S Esfandeh, Ali Akbar Abbasian Arani,Proposing a modified engine oil to reduce cold engine start damages and increase safety in high temperature operating conditions,Powder Technology,Vol. 355,pp. 251-263,2019.
17. Ali Akbar Abbasian Arani, Amin Jahani,Turbulent Pulsating Nanofluids Flow and Heat Transfer inside Constant Heat Flux Boundary Condition Helical-coil Tube,AUT Journal of Mechanical Engineering,2019.
18. Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, YAN Wei ,& Mon, Alireza Aghaie, Masoud Afrand, Nima Sina,MIXED CONVECTION OF FUNCTIONALIZED DWCNT/WATER NANOFLUID IN BAFFLED LID-DRIVEN CAVITIES,THERM SCI,Vol. 22,2018.
19. Ali Akbar Abbasian Arani, Ali Arefmanesh, Amirhossein Niroumand,Analysis of fully developed flow and heat transfer through n-sided polygonal ducts with round corners using the Galerkin weighted residual method,International Journal of Nonlinear Analysis and Applications,Vol. 9,pp. 175-193,2018.
20. Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani,An experimental determination and accurate prediction of dynamic viscosity of MWCNT (% 40)-SiO2 (% 60)/5W50 nano-lubricant,Journal of Molecular Liquids,Vol. 259,pp. 227-237,2018.

First
«
1
2
3
4
5
»
Last