CV
QR


Mohammad Barati

Mohammad Barati

Assistant Professor

College: Faculty of Chemistry

Department: Chemistry

Degree: Ph.D

CV
QR
Mohammad Barati

Assistant Professor Mohammad Barati

College: Faculty of Chemistry - Department: Chemistry Degree: Ph.D |

Assistant Professor

Applied Chemistry, University of Kashan, Kashan, Iran, 2015-Now.

Fields of Research: Gaseous, liquid and solid fuels production from bio resources. Biodiesel production from algae and other oily biomasses in supercritical conditions. Water, methanol, hexane and acetone in supercritical conditions is used for biomass conversion to biofuels in our Lab. Nanocomposites for bio applications is my other field of research. Extraction of chemicals from medicinal herbs for using in controlled drug delivery systems, especially polymer nanocomposites.

Current research projects: Kinetic study of biodiesel production processes in supercritical environment and conversion studies of bio-aviation fuels production processes in supercritical environment.

 

PhD

Applied Chemistry, University of Tehran, Tehran-Iran, 2011-2015.

Field of Research: Catalytic renewable fuels production from biomass.

More specifically, in my PhD thesis, I have focused on the production of hydrogen gas from biomass feedstock using catalytic sub and supercritical water gasification.  Ni, Ru, Cu and K are the metals we are working on. Renewable liquid fuels production especially higher alcohols and ethers is our parallel aim in the thesis. With progressing the experimental steps of thesis, we could produce relatively significant amounts of higher alcohols from a catalytic subcritical methanol/water process as well as hydrogen production was successful.
 

 

Master of Science

Applied Chemistry, University of Tabriz, Tabriz-Iran, 2008-2011.

Field of Study: Anticorrosion behavior of electroactive polymer coatings on steel.

In MSc thesis we try to inhibit the steel electrochemical corrosion with polymer nanocomposite coatings. The polymer matrix contain polyaniline as an electroactive polymer and Zn metal nanoparticles was applied as additive.  The nanocomposite coatings exhibited good anticorrosion performance. The field included courses such as preparation of polymer nanocomposites and electrochemical tests as CV and electrochemical impedance spectroscopy.

 

Bachelor of Science

Applied Chemistry, University of Tabriz, Tabriz-Iran, 2008-2011.

نمایش بیشتر

Biodiesel Production from Castor Oil in the Presence of Lipase/calcium alginate Biocatalyst; Optimizing and Evaluation of Temperature, Catalyst Amount, and Methanol to Oil Ratio Effects

AuthorsA. Davoodimehr, A. Shakeri, M. Barati
JournalJournal of Applied Research in Chemistry
Page number۱۹
Volume number۱۷
IFثبت نشده
Paper TypeFull Paper
Published At2023-08-19
Journal GradeScientific - research
Journal TypeElectronic
Journal CountryIran, Islamic Republic Of
Journal IndexISC

Abstract

در این مطالعه دیزل زیستی در حضور زیست­ کاتالیست لیپاز/کلسیم آلژینات از روغن کرچک تهیه شد. آنزیم لیپاز پانکراس بر پایه کلسیم آلژیناتی تثبیت و در واکنش استری­شدن روغن کرچک به متیل ­استرهای اسید چرب (FAMEs) استفاده شد. پایه کلسیم آلژینات سنتزشده با طیف­سنجی فروسرخ تبدیل فوریه (FTIR)، میکروسکوپ الکترونی روبشی گسیل میدانی (FESEM) و روش BET شناسایی شد. همچنین، پس از نشاندن لیپاز بر آن، محتوای پروتئینی زیست­ کاتالیست سنتزشده، همچنین، فعالیت آب­کافتی و زیست­ کاتالیستی آن در واکنش استری­ شدن ارزیابی شد. برای بهینه­ سازی واکنش تولید دیزل زیستی، طراحی آزمایش با به­ کارگیری نرم افزار SAS JMP Pro انجام شد. برای این کار سه عامل دمای واکنش، مقدار کاتالیست و نسبت متانول به روغن در نظر گرفته شد و تحلیل داده ­ها با استفاده از روش سطح پاسخ (RSM) انجام گرفت. نتیجه­ها نشان داد که بیشترین مقدار دیزل زیستی (86/96 %) در دمای C° 48/2، با 0/32 گرم کاتالیست و نسبت متانول به روغن 0/50 به­دست می­آید. همچنین، مشخص شد که مقادیر بالای هر کدام از این عامل­ها تاثیر منفی بر بازده تولید دیزل زیستی دارند که دلیل آن به ویژگی­ های ذاتی آنزیم، مانند غیرفعال ­شدن در دماها و مقادیر متانول بالاتر، همچنین، کلوخگی و تغییر صورت­بندی در غلظت­ های بالا نسبت داده شد.

Paper URL