Publications

Journal Papers:

  • Aghababaei, A., & Honarpisheh, M. (2023). Experimental and numerical investigation of residual stress distribution in Al-6061 tubes under using tubular channel angular pressing process by new trapezoidal channel. The Journal of Strain Analysis for Engineering Design, 58(4), 332-342.

  • Khanlaxi, H., & Honarpisheh, M. (2023). An upper bound analysis of channel angular pressing process considering die geometric characteristics, friction, and material strain-hardening. CIRP Journal of Manufacturing Science and Technology, 41, 259-276.

  • Esmailian, M., Honarpisheh, M., & Gheysarian, A. (2023). Optimization and Investigation of the Initial Parameters Effects on Machining Forces in Aerial Graphite Part. Iranian Journal of Materials Forming, 9(4), 56-68.

  • Gheysarian, A., & Honarpisheh, M. (2023). Optimization of the sintering temperature, cooling time and grain size parameters to reduce residual stresses of copper-aluminum functionally graded material using response surface methodology. The Journal of Strain Analysis for Engineering Design, 58(1), 26-37.

  • Rezaei, H., & Honarpisheh, M. (2022). Experimental and Numerical Investigation of Forming Limit Diagram of CP-Ti/St12 Bimetal in the Incremental Forming Process. Strength of Materials, 1-14.

  • Nikoueifar, M., Vaheb, A., & Honarpisheh, M. (2022). Design and manufacturing of an innovative rolling ball tool: A step forward towards the development of SPIF process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(4), 1593-1603.

  • Habibizadeh, A., Honarpisheh, M., & Golabi, S. (2022). Effect of friction stir spot welding parameters on the microstructure and properties of joints between aluminium and copper. Welding in the World, 66(9), 1757-1774.

  • Ghahreman, H. R., Honarpisheh, M., & Sarafrazi, M. B. (2022). Experimental and Numerical Study of Rotational Draw Bending Process of SS-304 Thin-walled Pipes Using Polyurethane and NBR Mandrels. Modares Mechanical Engineering, 22(5), 303-310.

  • Aghababaei, A., & Honarpisheh, M. (2022). Investigation of Microstructure and Mechanical Properties of Al-6061 Tubes Processed by Tubular Channel Angular Pressing Process Having Trapezoidal Channel Geometry. Iranian Journal of Materials Forming, 9(2), 36-45.

  • Tavajjohi, M. H., & Honarpisheh, M. (2022). Experimental and numerical study of the longitudinal and transverse residual stresses distribution in the constrained groove pressing process of pure copper sheets. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 236(1), 97-109.

  • Gheysarian, A., & Honarpisheh, M. (2021). Experimental and numerical investigation of process parameters on the residual stresses in the Al-Cu FGM materials. Experimental Techniques, 45, 601-612.

  • Habibizadeh, A., Honarpisheh, M., & Golabi, S. I. (2021). Determining optimum shear strength of friction stir spot welding parameters of AA1050/C10100 joints. Manufacturing Technology, 21(3), 315-329.

  • Nazari, F., Honarpisheh, M., & Zhao, H. (2021). Effect of the uncertainty of multi-cut contour method and friction coefficient on residual stresses of constrained groove pressing process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(11), 2039-2052.

  • Moazam, M. A., & Honarpisheh, M. (2021). Improving the mechanical properties and reducing the residual stresses of AA7075 by combination of cyclic close die forging and precipitation hardening. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(3), 542-549.

  • Asgari, M., Honarpisheh, M., & Mansouri, H. (2020). Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets. Journal of Ultrafine Grained and Nanostructured Materials, 53(1), 48-59.

  • Moazam, M. A., & Honarpisheh, M. (2020). The effects of combined cyclic close die forging and aging process on microstructure and mechanical properties of AA7075. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(9), 1242-1251.

  • Nazari, F., Honarpisheh, M., & Zhao, H. (2020). The effect of microstructure parameters on the residual stresses in the ultrafine-grained sheets. Micron, 132, 102843.

  • Khanlari, H., & Honarpisheh, M. (2020). Investigation of microstructure, mechanical properties and residual stress in non-equal-channel angular pressing of 6061 aluminum alloy. Transactions of the Indian Institute of Metals, 73, 1109-1121.

  • Honarpisheh, M., Nazari, F., & Haghighi, M. A. (2020). Annealing heat treatment effect on the residual stresses in hot-extruded aluminum alloy rods with high cross-sectional reduction. Strength of Materials, 52, 291-302.

  • Asgari, M., Honarpisheh, M., Amini, S., & Mansouri, H. (2020). Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets. Journal of Stress Analysis, 4(2), 107-114.
  • Residual Stresses Measurement in UIC 60 Rail by Ring-Core Method and Sectioning, AUT Journal of Mechanical Engineering 2 (1), 99-106, 2018.
  • Residual stress, tensile strength, and macrostructure investigations on ultrasonic assisted friction stir welding of AA 6061-T6, The Journal of Strain Analysis for Engineering Design, 0309324718789768, 2018.
  • Process Parameters Optimization of the Explosive-Welded Al/Cu Bimetal in the Incremental Sheet Metal Forming Process, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2018.
  • Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology, The International Journal of Advanced Manufacturing Technology 96 (9-12), 3069-3080, 2018.
  • Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process, Iranian journal of material forming 5 (1), 1-18, 2018.
  • Analytical model to estimate force of constrained groove pressing process, Journal of Manufacturing Processes 32, 11-19, 2018.
  • Through-depth residual stress measurement of laser bent steel–titanium bimetal sheets, The Journal of Strain Analysis for Engineering Design 53 (3), 130-140, 2018.
  • Numerical and experimental study on incremental forming process of Al/Cu bimetals: influence of process parameters on the forming force, dimensional accuracy and thickness variations, Journal of Mechanics of Materials and Structures 13 (1), 35-51, 2018.
  • Numerical and experimental study on the layer arrangement in the incremental forming process of explosive-welded low-carbon steel/CP-titanium bimetal sheet, The International Journal of Advanced Manufacturing Technology 95 (9-12), 3781-3796, 2018.
  • A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method, Journal of stress analysis 2 (2), 1-11, 2018.

 

  • Some of Conferences papers:

- Numerical and experimental investigation of effect the reduction on the residual stress in multilayer strip in cold rolling, ICMSAO/09-3, Sharjah, U.A.E, (2009).

- Experimental and numerical investigation of the effect of interlayer bonding strength on the deep drawing limit of bimetal laminates, ICMSAO/09-2, Sharjah, U.A.E, (2009).

- The Effect of Annealing Temperature on The Strength of Interface Bond in Cold Weld Rolled Multilayer, icwet09, Turkey, (2009).

- The Effects of Inclusion on the Cold-Welded Bonding of Sandwich Sheets Produced by Cold Rolling Process, icwet09, Turkey, (2009).

- Experimental and Numerical Investigation of Camber Defect in Aluminum Strip Cold Rolling, ICMR2009, UK.

- Prediction of Fiber Glass Orientation after Hot Rolling Process of Polymer Composite by Finite Element Modeling, The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), Dec. 27-30, Kish Island, Iran, (2010).

- Study on Hydroforming Process of a Copper Tube Using Finite Element Method, 2th international conference on research in science and technology, Turkey, (2016).

- Investigation the production of high-strength materials in the equal channel angular rolling process, International conference on Mechanical and Aerospace Engineering, (2016).

- Finite element numerical study changes in the thickness of the T-shaped bi-metal tube copper/Aluminum, Mechanical and Aerospace Engineering, Iran, (2016).

- Utilizing severe plastic deformation processes in improvement the strength of the alloys used in aerospace industries, International conference on Mechanical and Aerospace Engineering, Iran, (2016).