Two-step sintering of 0.93Bi0.5Na0.5TiO3-0.07BaTiO3 lead-free piezoelectric material

چکیده مقاله

Two-step sintering (TSS) as an efficient sintering method for obtaining dense microstructure while preventing
excess grain growth was used for sintering 0.93Bi0.5Na0.5TiO3-0.07BaTiO3 composition which is located near the
morphotropic phase boundary of this binary system. In order to compare the obtained microstructure and
piezoelectric properties, conventional single step sintering (SSS) was also examined. Microstructure evolution
during sintering at different temperatures was investigated to find the optimum sintering temperature. Ferroelectric
hysteresis loop as well as unipolar strain behavior of optimally sintered ceramics was studied. According
to density measurement and microstructure studies of the prepared ceramics, TSS resulted in finer and more
dense and uniform microstructure compared to SSS method. As a result remnant polarization of TSSed ceramic
was increased by 35% and its coercive field was decreased by 16%. The inverse piezoelectric coefficient of the
SSSed and TSSed was obtained 220 and 300 p.m./V, respectively. These values are high enough for practical
applications such as actuators. The obtained results clearly showed that TSS is capable of sintering
0.93Bi0.5Na0.5TiO3-0.07BaTiO3 at temperatures lower than which is required for SSS method. Therefore the
composition stoichiometry is maintained after sintering and denser microstructure without abnormal grain
growth is obtained which is responsible for improved electrical properties of the piezoceramics.