| Authors | S. F. Akhtarianfar, A. Ramazani, M. Almasi‑Kashi, A. H. Montazer |
|---|---|
| Journal | APPL PHYS A-MATER |
| Presented by | دانشگاه کاشان |
| Page number | 124-130 |
| Serial number | 1 |
| Volume number | 379 |
| Paper Type | Full Paper |
| Published At | 2018/4/20 |
| Journal Grade | ISI |
| Journal Type | Typographic |
| Journal Country | Aruba |
| Journal Index | ISI |
Abstract
Fabrication of different nanostructures based on template-assisted methods has become conventional, due to their numerous
potential applications. In this paper, Fe nanowire arrays (NWAs) were fabricated using a pulsed electrodeposition in porous
anodic alumina (PAA) templates. The effect of alumina barrier layer conditions such as barrier layer temperature (BLT) and
Cu pre-plating at the dendritic sections of pores on the electrodeposition efficiency (EE) and magnetic properties of Fe NWAs
in two pH regimes (2.6 and 4.0) has been investigated. At pH 4.0, BLT was changed from ~ 4 to ~ 32 °C, leading to an EE
of approximately 60% for BLT ~ 24 °C. Moreover, to overcome the problem of low EE ~ 2% at the pH of 2.6, Cu pre-plating
was performed with deposition current densities of 25 and 35 mA/cm2. This procedure increased the EE up to about 40%,
providing a promising approach to enhance the EE in the fabrication of Fe NWAs. Furthermore, a nearly constant trend of
magnetic properties was observed for highly crystalline Fe NWs.w