Publications

  1. Houman Niknam, A. Sadeghzadeh-Attar,  “Constructing trinary heterostructure of TiO2/CoCr2O4/SrTiO3 to enhance photocatalytic activity toward degradation of yellow 28 dye”, Materials Chemistry and Physics 299 (2023) 127489.
  2. Houman Niknam, Sadeghzadeh-Attar, “Mg-doped TiO2 nanorods-SrTiO3 heterojunction composites for efficient visible-light photocatalytic degradation of basic yellow 28”, Optical Materials 136 (2023) 113395.
  3. S. Kafian, A. Sadeghzadeh-Attar, “Photocatalytic degradation of Basic Blue 41 dye under visible light over SrTiO3/Ag3PO4 hetero-nanostructures”, International Journal of Applied Ceramic Technology 19 (2022) 3347-3357.
  4. M. Harooni, A. Sadeghzadeh-Attar, “Enhanced dielectric properties and energy storage density of Mg-doped SrTiO3 nanowire films”, Processing and Application of Ceramics 16 (2022) 55-63.
  5. J. Didari, A. Sadeghzadeh-Attar, “Ni-N codoped SnO2/Fe2O3 nanocomposite as advanced bifunctional photocatalyst for simultaneous photocatalytic redox conversion of Cr(VI) and As(III)”, Journal of the Taiwan Institute of Chemical Engineers 119 (2021) 232-244.
  6. A. Sadeghzadeh-Attar, “Enhanced photocatalytic hydrogen evolution by novel Nb-doped SnO2/V2O5 heteronanostructures under visible light with simultaneous basic red 46 dye degradation”, Journal of Asian Ceramic Societies 8 (2020) 662-676.
  7. A. Sadeghzadeh-Attar, “Boosting the photocatalytic ability of hybrid biVO4-TiO2 heterostructure nanocomposites for H2 production by reduced graphene oxide (rGO)”, Journal of the Taiwan Institute of Chemical Engineers 111 (2020) 325-336.
  8. A. Sadeghzadeh-Attar, “Binary Zn-Doped SnO2/Al2O3 Nanotube Composites for Visible-Light-Driven Photocatalytic Degradation of Basic Blue 41”, ACS Applied Nano Materials 3 (2020) 9931-9942.
  9. M.J. Fakharian-Qomi, A. Sadeghzadeh-Attar, "Template Based Synthesis of Plasmonic Ag-modified TiO2/SnO2 Nanotubes with Enhanced Photostability for Efficient Visible-Light Photocatalytic H2 Evolution and RhB Degradation”, ChemistrySelect 5 (2020) 6001-6010.
  10. M.J. Namayandeh, M. Mohammadimehr, M. Mehrabi, A. Sadeghzadeh-Attar, “Temperature and thermal stress distributions in a hollow circular cylinder composed of anisotropic and isotropic materials”, Advances in Materials Research 9 (2020) 15-32.
  11. A. Sadeghzadeh-Attar, “Photocatalytic degradation evaluation of N-Fe codoped aligned TiO2 nanorods based on the effect of annealing temperature”, Journal of Advanced Ceramics 9 (2020) 107-122.
  12. A. Sadeghzadeh-Attar, “Preparation and enhanced photocatalytic activity of Co/F codoped tin oxide nanotubes/nanowires: a wall thickness‑dependence study”, Applied Physics A 125 (2019) 768.
  13. A. Sadeghzadeh-Attar, M.R. Bafandeh, “Effect of annealing on UV‐visible absorption and photoluminescence behavior of liquid phase deposited TiO2 nanorods”, International Journal of Applied Ceramic Technology 16 (2019) 2429-2440.
  14. A. Sadeghzadeh-Attar, “Dielectric Properties of Nanostructured Bi4Ti3O12 and Bi12TiO20 Films Prepared by Sol-Gel Method", Journal of Metallurgical and Materials Engineering 30 (2019) 29-42 (In Persian).
  15. A. Sadeghzadeh-Attar, M.R. Bafandeh, “The effect of annealing temperature on the structure and optical properties of well-aligned 1D SnO2 nanowires synthesized using template-assisted deposition”, CrystEngComm 20 (2018) 460-469.
  16. A. Sadeghzadeh-Attar, I. Akhavan-Safaei, M.R. Bafandeh, “UV‐visible absorption and photoluminescence characteristics of SnO2 nano‐tube/wire arrays fabricated by LPD method”, International Journal of Applied Ceramic Technology 15 (2018) 1084-1094.
  17. A. Sadeghzadeh-Attar, “Efficient photocatalytic degradation of methylene blue dye by SnO2 nanotubes synthesized at different calcination temperatures”, Solar Energy Materials and Solar Cells 183 (2018) 16-24.
  18. A. Sadeghzadeh-Attar, S. Hajijafari-Bidgoli, M.R. Bafandeh, "Structure and dielectric behaviour of Sr-modified Bi4Si3O12 thin films prepared via sol gel method”, Processing and Application of Ceramics 12 (2018) 36-44. 
  19. A. Sadeghzadeh-Attar, S. Hajijafari-Bidgoli, M.R. Bafandeh, “Structural and optical properties of Sr-modified bismuth silicate nanostructured films synthesized by sol gel method”, Journal of Nanostructures 7 (2017) 258-265.
  20. A. Sadeghzadeh Attar, E. Salehi Sichani, S. Sharafi, “Structural and dielectric properties of Bi-doped barium strontium titanate nanopowders synthesized by sol-gel method”, Journal of Materials Research and Technology 6 (2017) 108-115.
  21. A. Sadeghzadeh-Attar, “Structural and optical characteristic of single crystal rutile-titania nanowire arrays prepared in alumina membranes”, Materials Chemistry and Physics 182 (2016) 148-154.
  22. A. Sadeghzadeh-Attar, G. AyubiKia, M. Ehteshamzadeh, “Improvement in tribological behavior of novel sol-enhanced electroless Ni-P-SiO2 nanocomposite coatings”, Journal of Surface & coatings Technology 307 (2016) 837-848.
  23. A. Sadeghzadeh Attar, Z. Hassani, “Fabrication and growth mechanism of single-crystalline rutile TiO2 nanowires by liquid-phase deposition process in a porous alumina template”, Journal of Materials Science & Technology 31 (2015) 828-833.
  24. Z. Ansari, M. Alizadeh, A. Sadeghzadeh Attar, “Synthesis and corrosion behavior of mixed metal oxides Al2O3-MgO-TiO2 coatings on aluminum substrate", Journal of Advanced Materials in Engineering, Isfahan University of Technology, 2013, (In Persian)
  25. A. Sadeghzadeh Attar, M. Sasani Ghamsari, F. Hajiesmaeilbaigi, S. Mirdamadi, K. Katagiri, K. Koumoto, “Sol-gel template synthesis and characterization of aligned anatase-TiO2 nanorod arrays with different diameter”, Materials Chemistry and Physics 13 (2009) 856-860.
  26. A. Sadeghzadeh Attar, M. Sasani Ghamsari, F. Hajiesmaeilbaigi, S. Mirdamadi, K. Katagiri, K. Koumoto, “Synthesis and characterization of anatase and rutile TiO2 nanorods by template-assisted method”, Journal of Materials Science 43 (2008) 5924-5929.
  27. A. Sadeghzadeh Attar, M. Sasani Ghamsari, F. Hajiesmaeilbaigi, S. Mirdamadi, K. Katagiri, K. Koumoto, “Study on the effects of complex ligands in the synthesis of TiO2 nanorod arrays using the sol-gel template method”, Journal of Physics D: Applied Physics 41 (2008) 155318.
  28. A. Sadeghzadeh Attar, M. Sasani Ghamsari, F. Hajiesmaeilbaigi, S. Mirdamadi, “Modifier ligands effects on the synthesized TiO2 nanocrystals”, Journal of Materials Science 43 (2008) 1723-1729.
  29. A. Sadeghzadeh Attar, S. Mirdamadi, F. Hajiesmaeilbaigi, M. Sasani Ghamsari, “Growth of TiO2 nanorods by sol-gel template process”, Journal of Materials Science and Technology 23 (2007) 611-613.
  30. A. Sadeghzadeh Attar, M. Sasani Ghamsari, F. Hajiesmaeilbaigi, Sh. Mirdamadi, "Template-based growth of TiO2 nanorods by sol-gel", Semiconductor Physics, Quantum Electronics & Optoelectronics 10 (2007) 36-39.
  31. A. Sadeghzadeh Attar, J. Rassizadehghani, "Effect of bainitic microstructure on mechanical properties of microalloyed cast steels", Journal of College of Engineering, University of Tehran 40 (2007) 943-951 (In Persian).
  32. A. Sadeghzadeh Attar, J. Rassizadehghani, "Effect of V, Ti and B on microstructure and mechanical properties of austempered microalloy cast steels", Journal of Casting 74 (2003) 24-29 (In Persian).
  33. R. Hosseini, M. Parsa, A. Sadeghzadeh Attar, A.M. Amadeh, S.R. Allahkaram, "Investigation of corrosion protection galvanized and chromated distorted coats", Journal of Iranian Corrosion Association 13-14 (2003) 18-22. (In Persian)