[1].jpg)
Professor Aliakbar Abbasian Arani
abbasian@kashanu.ac.ir
College: Faculty of Mechanical Engineering
-
Department: Mechanical Engineering - Heat and Fluid
Degree: Ph.D |
Articles
| # | Paper Title | Authors | Publication/Conference | Date | Type |
|---|---|---|---|---|---|
| 1 | Analysis of fluid flow and heat transfer of nanofluid inside triangular enclosure equipped with rotational obstacle | Ali Akbar Abbasian Arani, Mehrdad Kazemi | Journal of Mechanical Science and Technology | 2019 | Article In Publication |
| 2 | Numerical optimization of obstructed high temperature heat exchanger for recovery from the flue gases by considering ash fouling characteristics | Ali Akbar Abbasian Arani, Ali Arefmanesh, Hamidreza Ehteram | International Journal of Numerical Methods for Heat & Fluid Flow | 2019 | Article In Publication |
| 3 | Heat transfer intensification in pin-fin heat sink by changing pin-length/longitudinal-pitch | M Rezaee, M Khoshvaght-Aliabadi, AA Abbasian Arani, SH Mazloumi | Chemical Engineering and Processing-Process Intensification | 2019 | Article In Publication |
| 4 | Experimental investigation of thermal conductivity behavior of MWCNTS-Al2O3/ethylene glycol hybrid Nanofluid: providing new thermal conductivity correlation | Ali Akbar Abbasian Arani, Farhad Pourmoghadam | Heat and Mass Transfer | 2019 | Article In Publication |
| 5 | Shell and tube heat exchanger optimization using new baffle and tube configuration | Ali Akbar Abbasian Arani, Reza Moradi | Applied Thermal Engineering | 2019 | Article In Publication |
| 6 | Analysis of heat transfer in a multilayer living tissue using the Galerkin weighted residuals method | Ali Akbar Abbasian Arani, Ali Arefmanesh, Armin Emamifar | Amirkabir Journal of Mechanical Engineering | 2019 | Article In Publication |
| 7 | Effect of vortex generator on a wavy wall heat exchanger performance for turbulent nanofluid flow under a magnetic field | Ali Akbar Abbasian Arani, Siavash Gholami Ghale Nazeri | Amirkabir Journal of Mechanical Engineering | 2019 | Article In Publication |
| 8 | Brownian models effect on turbulent fluid flow and heat transfer and entropy generation of water/boehmite alumina nanofluid inside enclosure | Behrouz Mozafari, Ali Akbar Abbasian Arani, Ghanbar Ali Sheikhzadeh, Mahmoud Salimi | International Journal of Numerical Methods for Heat & Fluid Flow | 2019 | Article In Publication |
| 9 | Proposing a modified engine oil to reduce cold engine start damages and increase safety in high temperature operating conditions | Mohammad Hemmat Esfe, S Esfandeh, Ali Akbar Abbasian Arani | Powder Technology | 2019 | Article In Publication |
| 10 | Proposing new hybrid nano-engine oil for lubrication of internal combustion engines: Preventing cold start engine damages and saving energy | Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, Saeed Esfandeh, Masoud Afrand | Energy | 2019 | Article In Publication |
| 11 | Turbulent Pulsating Nanofluids Flow and Heat Transfer inside Constant Heat Flux Boundary Condition Helical-coil Tube | Ali Akbar Abbasian Arani, Amin Jahani | AUT Journal of Mechanical Engineering | 2019 | Article In Publication |
| 12 | Thermal radiation effect on the flow field and heat transfer of Co3O4-diamond/EG hybrid nanofluid using experimental data: A numerical study | Ali Akbar Abbasian Arani, Farhad Monfaredi, Alireza Aghaei, Masoud Afrand, Ali J Chamkha, Hesamoddin Emami | The European Physical Journal Plus | 2019 | Article In Publication |
| 13 | Enhanced heat transfer in pin-fin heat sink working with nitrogen gas-water two-phase flow: Variable pin-length and longitudinal-pitch | Mohammad Rezaee, Morteza Khoshvaght-Aliabadi, Ali Akabr Abbasian Arani, Syead Hossein Mazloumi | Journal of Thermal Analysis and Calorimetry | 2019 | Article In Publication |
| 14 | Improving shell and tube heat exchanger themohydraulic performance using combined baffle | Ali Akbar Abbasian Arani, Hamed Uosofvand | International Journal of Numerical Methods for Heat & Fluid Flow | 2019 | Article In Publication |
| 15 | On the thermal characteristics of a manifold microchannel heat sink subjected to nanofluid using two-phase flow simulation | Farzad Pourfattah, Ali Akbar Abbasian Arani, Mohammad Reza Babaie, HM Nguyen, A Asadi | International Journal of Heat and Mass Transfer | 2019 | Article In Publication |
| 16 | Energy and exergy analysis and optimization of a heat sink collector equipped with rotational obstacles | AA Abbasian Arani, S Sadripour, S Kermani | AUT Journal of Mechanical Engineering | 2018 | Article In Publication |
| 17 | A study on rheological characteristics of hybrid nano-lubricants containing MWCNT-TiO2 nanoparticles | Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, Mohammad Reza Madadi, Ali Alirezaie | Journal of Molecular Liquids | 2018 | Article In Publication |
| 18 | Wings shape effect on behavior of hybrid nanofluid inside a channel having vortex generator | Ghanbar Ali Sheikhzadeh, Faezeh Nejati Barzoki, Ali Akbar Abbasian Arani, Farzad Pourfattah | Heat and Mass Transfer | 2018 | Article In Publication |
| 19 | Improving engine oil lubrication in light-duty vehicles by using of dispersing MWCNT and ZnO nanoparticles in 5W50 as viscosity index improvers (VII) | Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, Saeed Esfandeh | Applied Thermal Engineering | 2018 | Article In Publication |
| 20 | Experimental study on rheological behavior of monograde heavy-duty engine oil containing CNTs and oxide nanoparticles with focus on viscosity analysis | Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, Saeed Esfandeh | Journal of Molecular Liquids | 2018 | Article In Publication |
Showing 1-20 of 198 items.