| Analytical model to estimate force of constrained groove pressing process | Journal of Manufacturing Processes | F Nazari, M Honarpisheh |
| Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process | Iranian journal of material forming | MR Sakhtemanian, S Amini, M Honarpisheh |
| Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology | The International Journal of Advanced Manufacturing Technology | M Honarpisheh, MM Jobedar, I Alinaghian |
| Process Parameters Optimization of the Explosive-Welded Al/Cu Bimetal in the Incremental Sheet Metal Forming Process | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | A Gheysarian, M Honarpisheh |
| Residual Stresses Measurement in UIC 60 Rail by Ring-Core Method and Sectioning | AUT Journal of Mechanical Engineering | MA Moazam, M Honarpisheh |
| بررسی تأثیر ارتعاشات فراصوت بر خواص مکانیکی ورق دو لایه فولاد کم کربن-تیتانیوم خالص در فرآیند شکل دهی افزایشی | فصلنامه علمی-پژوهشی مواد نوین | MR Sakhtemanina, M Honarpisheh, S Amini |
| Residual stress, tensile strength, and macrostructure investigations on ultrasonic assisted friction stir welding of AA 6061-T6 | The Journal of Strain Analysis for Engineering Design | I Alinaghian, S Amini, M Honarpisheh |
| Water pressure effects on strength and deformability of fractured rocks under low confining pressures | Rock Mechanics and Rock Engineering Journal | Majid-Noorian Bidgoli, Lanru Jing |
| Anisotropy of strength and deformability of fractured rocks | Journal of Rock Mechanics and Geotechnical Engineering | Majid Noorian-Bidgoli, Lanru Jing |
| Numerical evaluation of strength and deformability of fractured rocks | Journal of Rock Mechanics and Geotechnical Engineering | Majid Noorian-Bidgoli, Zhihong Zhao, Lanru Jing |
| Thermoluminescence dosimetry properties and kinetic analysis of MgSO4:Dy microcrystalline prepared by solid state method | Radiat. Meas | Zahedifar, M., Almasifard, F., Sadeghi, E., Harooni, S. and Kashefi biroon , M |
| Thermoluminescence and photoluminescece properties of NaCl:Mn, NaCL:Cu nano-particles produced using co-precipitation and sono-chemistry methods | Nucl. Inst. And Meth. A | Mehrabi, M., Zahedifar, M., Saeidi-Sogh, Z., Ramazani-Moghaddam-Arani, A., Sadeghi, E. and Harooni, S |
| Thermoluminescence dosimetry features of Dy and Cu doped SrF2 nanoparticles under gamma irradiation | Appl. Radiat. Isot | Zahedifar, M., Sadeghi, E., Kashefi biroon , M., Harooni, S. and Almasifard, F |
| An improved mixed order model for describing thermoluminescence glow curves | IJST | Zahedifar, M. and Harooni, S |
| A new interactive thermoluminescence mixed-order glow curve deconvolution function | Radiat. Eff. Def. Solids | Zahedifar, M. and Harooni, S |
| Thermoluminescence characteristics of the novel CaF2:Dy nanoparticles prepared by using the hydrothermal method | Nucl. Inst. And Meth. B | Zahedifar, M., Sadeghi, E. and Harooni, S |
| Thermoluminescece properties of BeO:Mg nanoparticles produced by sol-gel method | JNS | Zahedifar, M., Mehrabi, M., Modarres, M. and Harooni, S |
| Thermoluminescence kinetic analysis of quartz using an improved general order model for exponential distribution of activation energies | Nucl. Inst. And Meth. A | Zahedifar, M., Harooni, S. and Sadeghi, E |
| Synthesis of CaSO4: Mn nanosheets with high thermoluminescence sensitivity | Appl. Radiat. Isotopes | Zahedifar, M., Mehrabi, M. and Harooni, S. |
| Thermoluminescence kinetic analysis of basaltic rocks using a generalized model for exponential distribution of activation energies | Nucl. Inst. And Meth. B | Zahedifar, M., Rezaeian, P. and Harooni, S |