Professor
College: Faculty of Mechanical Engineering
Department: Mechanical Engineering - Solid Design
Degree: Ph.D
Birth Year: 1963
| # | Paper Title | Authors | Publication/Conference | Date | Type |
|---|---|---|---|---|---|
| 1 | Liquefied Natural Gas (LNG): Alternative Marine Fuel Restriction and Regulation, Considerations, Environmental and Economic Assessment | Mohammadreza Salarkia1, Sa’id Golabi | Energy Engineering & Management | 2021 | Article In Publication |
| 2 | Investigating the effect of stiffness/thickness ratio on the optimal location of piezoelectric actuators through PSO algorithm | Javad Jafari Fesharaki, Seyed Ghasem Madani, Sa’id Golabi | Journal of Solid Mechanics | 2017 | Article In Publication |
| 3 | Effect of stiffness ratio of piezoelectric patches and plate on stress concentration reduction in a plate with a hole | J. Jafari Fesharaki, S. Golabi | Mechanics of Advanced Materials and Structures | 2016 | Article In Publication |
| 4 | Numerical and analytical investigation of a cylinder made of functionally graded materials under thermo-mechanical fields | Javad Jafari Fesharaki, Seyed Ghasem Madani, Sa’id Golabi | Journal of Modern processes in Manufacturing and production | 2016 | Article In Publication |
| 5 | Optimal Design Method for Elliptical WN-Flange and its Closure Using FEA & NSGA-II to comply with ASME Sec. VIII-Div. 2, no Leakage Conditions & Bolt Integrity | حسین وثوق,سعید گلابی | Journal of Pressure Vessel Technology | 2025-04-30 | Article In Publication |
| 6 | Dynamic instability region analysis of reinforced-CNTs truncated conical shells using mixed DQ-Bolotin method | حسین وثوق,فرشید احمدی,سعید گلابی | Structural Engineering and Mechanics | 2023-07-25 | Article In Publication |
| 7 | Determining Optimum Butt-Welding Parameters of 304 Stainless-Steel Plates Using Finite Element, Particle Swarm and Artificial Neural Network | Masoud Mohammadi- Sa’id Golabi- Behzad Amirsalari | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | 2020-10-07 | Article In Publication |
| 8 | Reducing stress concentration around a hole in a plate subjected to biaxial tension | S. M. R. Allahyari · S. Golabi | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | 2019-12-06 | Article In Publication |
| 9 | Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network | Mohammadreza Salarkia- Sa’id Golabi- Behzad Amirsalari | Journal of Applied and Computational Mechanics | 2019-10-18 | Article In Publication |
| 10 | Reducing Stress Concentration Around a Hole in a Thin‑Wall Cylinder Subjected to Internal Pressure Using Piezoelectric Patches | S. M. R. Allahyari · S. Golabi | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | 2019-10-3 | Article In Publication |
| 11 | Multi-Objective Optimization of Residual Stress and Cost in Laser Shock Peening Process Using Finite Element Analysis and PSO Algorithm | Sa’id Golabi & Mohammad Reza Vakil & Behzad Amirsalari | Lasers in Manufacturing and Materials Processing | 2019-09-13 | Article In Publication |
| 12 | Multi‑objective optimization of stainless steel 304 tube laser forming process using GA | Mohammadali Keshtiara · Sa’id Golabi · Rasoul Tarkesh Esfahani | Engineering with Computers | 2019-08-19 | Article In Publication |
| 13 | Best pattern for placement of piezoelectric actuators in classical plate to reduce stress concentration using PSO algorithm | Javad Jafari Fesharaki, Seyed Ghasem Madani, Sa’id Golabi | Mechanics of advanced materials and structures | 29 Jun 2018. | Article In Publication |
| 14 | Best pattern for placement of piezoelectric actuators in classical plate to reduce stress concentration using PSO algorithm | Javad Jafari Fesharaki, Seyed Ghasem Madani, Sa’id Golabi | Mechanics of advanced materials and structures | 2018-06-29 | Article In Publication |
| 15 | Effect of stiffness and thickness ratio of host plate and piezoelectric patches on reduction of the stress concentration factor | Javad Jafari Fesharaki, Seyed Ghasem Madani, Sa'id Golabi | International Journal of Advanced Structure Engineering | 2016-9-01 | Article In Publication |
| 16 | Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed | Ali Foroozmehr, Mohsen Badrossamay, Ehsan Foroozmehr, Sa’id Golabi | Materials and Design | 2015-10-01 | Article In Publication |
| 17 | FEM simulation of the bending angle during the laser forming of FGM Plates | Hamid Madaninasab, Sa'id Golabi | Journal of Thermal Stresses | 2015-6-01 | Article In Publication |
| 18 | Numerical Simulation of Power, Movement Speed and Laser Beam Diameter in Forming Process of FGM Plates According to the Exponential Law | Madani Nasab H., Golabi, S. | The 14th International Conference of Iranian Aerospace Society Communication and Space Technology | 2015-3-3 | Article In Conference |
| 19 | Examining the Effects of Continuously Variable Transmission (CVT) and a new mechanism of planetary gearbox of CVT on Car Acceleration and Fuel Consumption | Ehsan Malekipour, Sa'id Golabi | International Journal of Application or Innovation in Engineering & Management | 2014-9-01 | Article In Publication |
| 20 | Determining frustum depths of 304 stainless steel plates with various diameters and thicknesses by incremental forming | Sa'id Golabi, Hossein Khazaali | Journal of Mechanical Science and Technology | 2014-8-01 | Article In Publication |