Assistant Professor Hossein Talebi-Ghadikolaee
h.talebi.q@kashanu.ac.ir
College: Faculty of Mechanical Engineering
-
Department: Mechanical Engineering - Manufacturing and Production
Degree: Doctoral |
Fields of Interest:
- Metal Forming processes
- Ductile Fracture
- Plasticity
- Sheet Metal forming (Mechanical and Formability testing, Micro forming, Material anisotropy, Non-linear deformation loading, High strain rate deformation, Hot forming, Finite element modeling)
- Ductility and Ductile Damage evolution
- Deformation Mechanics
- Fuel cell (Metallic Bipolar plates)
- Laser Forming
- Fracture and Mechanical Behaviour of Additively Manufactured Product
Articles
| # | Paper Title | Authors | Publication/Conference | Date | Type |
|---|---|---|---|---|---|
| 1 | Evaluation of constitutive modeling for dynamic Plastic-Fracture modeling of Dual Phase (DP590) steel sheets | فرهاد نجف نیا,حسین طالبی قادیکلائی,امیر حسین بامداد,احسان دورچه پور,رامین هاشمی | Evaluation of constitutive modeling for dynamic plastic-fracture modeling of dual phase (DP590) steel sheets | 2025-05-19 | Article In Publication |
| 2 | Selection of optimum performance conditions in the laser-assisted turning of AISI 4340 hardened steel through the coupling of entropy/MCDM analysis | فرزاد احمدی خطیر,وحید مدانلو,وحید عابدینی,صامت آکار,حسین طالبی قادیکلائی | Selection of optimum performance conditions in the laser-assisted turning of AISI 4340 hardened steel through the coupling of entropy/MCDM analysis | 2024-11-15 | Article In Publication |
| 3 | The effect of aging heat treatment on the formability and microstructure of the AA6063 tube in the rotary draw bending process | مجید الیاسی,حسین طالبی قادیکلائی,علی زین العابدین بیگی,وحید مدانلو,فرزاد احمدی | Journal of Engineering Research | 2024-10-11 | Article In Publication |
| 4 | Numerical and experimental study of energy absorption in multilayer tubes manufactured through spinning forming process under quasi-static axial loading | مجید الیاسی,حسین طالبی قادیکلائی,فرزاد احمدی خطیر,وحید مدانلو | Alexandria Engineering Journal | 2024-08-26 | Article In Publication |
| 5 | Insights into spring-back prediction: a comparative analysis of constitutive models for perforated U-shaped roll-formed steel profiles | سعید حاج احمدی,حسن مسلمی نائینی,حسین طالبی قادیکلائی,رسول صفدریان,علی زین العابدین بیگی | The International Journal of Advanced Manufacturing Technology | 2024-08-12 | Article In Publication |
| 6 | Predictive modeling of spring-back in pre-punched sheet roll forming using machine learning | علی زین العابدین بیگی,حسن مسلمی نائینی,حسین طالبی قادیکلائی,امیر حسین ربیعی,سعید حاج احمدی | The Journal of Strain Analysis for Engineering Design | 2024-07-26 | Article In Publication |
| 7 | Prediction and optimization of strain homogeneity in PTCAP process using ANFIS, ANN, and Taguchi approaches | وحید مدانلو,بهنام آخوندی,احمد مشایخی,حسین طالبی قادیکلائی | International Journal on Interactive Design and Manufacturing (IJIDeM) | 2024-06-19 | Article In Publication |
| 8 | Optimal geometry selection for the microchannel in bipolar plates of PEM fuel cells from a multi-criteria decision analysis point of view | فرزاد احمدی خطیر,محمد مهدی برزگری,حسین طالبی قادیکلائی | International Journal on Interactive Design and Manufacturing (IJIDeM) | 2024-05-28 | Article In Publication |
| 9 | The use of MCDM techniques to assess fluid pressure on the bending quality of AA6063 heat-treated tubes | وحید مدانلو,مجید الیاسی,حسین طالبی قادیکلائی,فرزاد احمدی خطیر,بهنام آخوندی | Journal of Engineering Research | 2024-04-29 | Article In Publication |
| 10 | Hydro-mechanical deep drawing of conical components: Wrinkling behavior and process enhancement | افسون امینی,حسن مسلمی نائینی,حامد دیلمی عضدی,حسین طالبی قادیکلائی,حسن بادپروا,علی زین العابدین بیگی | Journal of Engineering Research | 2024-04-09 | Article In Publication |
| 11 | Characterization and prediction of micro channel depth of ultra-thin bipolar plates for PEMFCs | حسین طالبی قادیکلائی,مجید الیاسی,شهاب الدین صدیقی,فرزاد احمدی خطیر,وحید مدانلو | Journal of Engineering Research | 2024-02-03 | Article In Publication |
| 12 | Bending Behavior of Rectangular Cross‑Sectional Tube Considering Internal Fluid Pressure Efects | مجید الیاسی,حسین طالبی قادیکلائی,شهاب الدین صدیقی,وحید مدانلو,فرزاد احمدی خطیر | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | 2023-11-29 | Article In Publication |
| 13 | Experimental investigation and numerical simulation of the effect of type of bending die on the quality of tube forming in rotary draw bending process | مجید الیاسی,فرزاد احمدی خطیر,حسین طالبی قادیکلائی,وحید مدانلو | International Journal of Lightweight Materials and Manufacture | 2023-10-26 | Article In Publication |
| 14 | Multiple criteria decision support analysis for manufacturing process parameters selection of metallic bipolar plates for polymer electrolyte membrane fuel cells | حسین طالبی قادیکلائی,وحید مدانلو,مجید الیاسی,فرزاد احمدی خطیر | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | 2023-09-27 | Article In Publication |
| 15 | Investigation of the effect of process parameters in sheet hydroforming process | وحید مدانلو,بهنام آخوندی,فرزاد احمدی خطیر,حسین طالبی قادیکلائی,احمد مشایخی | International Journal on Interactive Design and Manufacturing (IJIDeM) | 2023-06-14 | Article In Publication |
| 16 | Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout | حسین طالبی قادیکلائی,شهاب الدین صدیقی,محمد مهدی برزگری | Hydrogen, Fuel Cell & Energy Storage | 2023-04-01 | Article In Publication |
| 17 | Numerical-experimental investigation of using rubber blank holder on wrinkling of metallic bipolar plates formed by stamping process | شهاب الدین صدیقی,محمد مهدی برزگری,حسین طالبی قادیکلائی | International Journal of Hydrogen Energy | 2023-03-31 | Article In Publication |
| 18 | Investigation of deformation mechanics and forming limit of thin-walled metallic bipolar plates | حسین طالبی قادیکلائی,محمد مهدی برزگری,شهاب الدین صدیقی | International Journal of Hydrogen Energy | 2023-01-17 | Article In Publication |
| 19 | Experimental-numerical analysis of ductile damage modeling of aluminum alloy using a hybrid approach: ductile fracture criteria and adaptive neural-fuzzy system (ANFIS) | حسین طالبی قادیکلائی,حسن مسلمی نائینی,امیر حسین ربیعی,علی زین العابدین بیگی,سرگی الکساندروف | International Journal of Modelling and Simulation | 2022-09-27 | Article In Publication |
| 20 | Predictive modeling of damage evolution and ductile fracture in bending process | حسین طالبی قادیکلائی,حسن مسلمی نائینی,عباد طالبی قادیکلایی,محمد جواد میرنیا | Materials Today Communications | 2022-04-26 | Article In Publication |
Showing 1-20 of 53 items.