رزومه
QR


عبدالله ایرانخواه

عبدالله ایرانخواه

دانشیار

دانشکده: دانشکده مهـندسـی

گروه: مهندسی شیمی

مقطع تحصیلی: دکترای تخصصی

رزومه
QR
عبدالله ایرانخواه

دانشیار عبدالله ایرانخواه

دانشکده: دانشکده مهـندسـی - گروه: مهندسی شیمی مقطع تحصیلی: دکترای تخصصی |

1- غیر از ساعات اعلام شده در صورت حضور در خدمت دانشجویان محترم خواهم بود.

2- جهت هماهنگی بیشتر قبل از مراجعه از طریق ایمیل یا پیامک یا تلفن با بنده مکاتبه شود.

3- در برخی از ساعت های مشاوره دانشجویان ممکن است در آزمایشگاه تحقیقاتی هیدروژن یا آزمایشگاه تحقیقاتی واکنشهای پلاسمایی (داخلی 2861 یا 2823) باشم.

نمایش بیشتر

Effect of Pt on Zn-Free Cu-Al Catalysts for Methanol Steam Reforming to Produce Hydrogen

نویسندگانمهران جعفری,عبداله ایران خواه,مسعود محمودی زاده,نجمه هشیار
نشریهIRAN J CHEM CHEM ENG
شماره صفحات93
شماره مجلد37
نوع مقالهFull Paper
تاریخ انتشار2018-08-01
رتبه نشریهعلمی - پژوهشی
نوع نشریهالکترونیکی
کشور محل چاپایران
نمایه نشریهISC ,JCR

چکیده مقاله

Steam reforming of methanol can be considered an attractive reaction aiming at hydrogen production for PEM fuel cells. Although Cu/Al-contained catalysts are considerably evaluated in this reaction, further evaluation is essential to evaluate the impact of some promoters like Pt in order to find a comprehensively optimized catalyst. Pt promoter is employed with different methods in this study. Firstly, the amount of Cu loading in Cu/Al ratio is optimized via coprecipitation method. The sample containing 30% Wt. of Cu exhibits better performance with methanol conversion of 70% and CO selectivity of 0.44%. Besides, impregnating different amount of Pt onto Al2O3 reveals an inadequate potential for this reaction. In contrary, doping Pt into Cu/Al catalyst increases the methanol conversion as high as 81% and CO selectivity reaches to approximately zero at 270 °C. In addition, using a dual-bed reactor including Cu/Al and Pt/Al2O3 catalyst displays a relatively satisfactory performance by which the conversion and selectivity are found 83.7% and 1.5%, respectively. In this study, analyses of X-Ray Diffraction, Scanning Electron Microscopy, and BET surface area are used to characterize the synthesized catalysts.