| نویسندگان | آقاسجاد جهانبخت |
| نشریه | APPL OPTICS |
| تاریخ انتشار | 2016-10-01 |
| نمایه نشریه | ISI |
چکیده مقاله
Dual injection-locked optoelectronic oscillators (DIL-OEOs) have been introduced as a means to achieve very
low-noise microwave oscillations while avoiding the large spurious peaks that occur in the phase noise of the
conventional single-loop OEOs. In these systems, two OEOs are inter-injection locked to each other. The
OEO with the longer optical fiber delay line is called the master OEO, and the other is called the slave OEO.
Here, a frequency domain approach for simulating the phase noise spectrum of each of the OEOs in a DIL-OEO
system and based on the conversion matrix approach is presented. The validity of the new approach is verified by
comparing its results with previously published data in the literature. In the new approach, first, in each of the
master or slave OEOs, the power spectral densities (PSDs) of two white and 1∕f noise sources are optimized such
that the resulting simulated phase noise of any of the master or slave OEOs in the free-running state matches the
measured phase noise of that OEO. After that, the proposed approach is able to simulate the phase noise PSD of
both OEOs at the injection-locked state. Because of the short run-time requirements, especially compared to
previously proposed time domain approaches, the new approach is suitable for optimizing the power injection
ratios (PIRs), and potentially other circuit parameters, in order to achieve good performance regarding the phase
noise in each of the OEOs. Through various numerical simulations, the optimum PIRs for achieving good phase
noise performance are presented and discussed; they are in agreement with the previously published results. This
further verifies the applicability of the new approach. Moreover, some other interesting results regarding the spur
levels are also presented.