چاپ شده در مجلات
مقالات چاپ شده در مجلات علمی ایرانی
" بررسی و مقایسه نحوه توزیع کرنش در ورق‌های ضخیم فولادی میکروآلیاژی و ساده کربنی"، فصلنامه علمی و پژوهشی شریف، پائیز 86، شماره 39.
"بررسی اثر پارامترهای شکل‌دهی ورق‌های جوش دوخت شده بر شکل‌پذیری آنها"، ماهنامه فناوری ساخت و تولید (ماهنامه دارای رتبه علمی وترویجی)، سال اول، شماره 2، 1389.
"بررسی اثر عملیات پیرسازی بر روی رفتار سایشی آلیاژ تیتانیوم"، فصلنامه علمی پژوهشی مهندسی مکانیک جامدات، 1396، پذیرفته شده.
"جوشکاری اصطکاکی اغتشاشی ارتعاشی و بررسی اثر پارامترهای آن بر ریزساختار و خواص مکانیکی جوش در آلیاژ آلومینیوم 5052"، ماهنامه علمی پژوهشی مهندسی مکانیک مدرس، دوره 17، صفحه: 217-224، 1396.
مقالات چاپ شده در مجلات معتبر بین المللی (ISI)
Analysis of microstructure and mechanical properties of different hot stamped B- bearing steels, Steel Research Int., 2010, Vol. 81, pp. 216-223
Investigation into formability of tailor welded blank consisted of IF-steel sheets with different thicknesses- experiment and simulation, Steel Research Int., 2010, Vol. 81, pp. 600-604
Effect of different yield criteria on prediction of wrinkling initiation of interstitial-free (IF) galvanized steel sheet, Materials and Design, 2011, Vol. 32, pp. 3370-3376
Formability enhancement of galvanized IF-steel TWB by modification of forming parameters, Journal of Materials Engineering and Performance, 2012, Vol. 21, pp. 564-571
Analysis of microstructure and mechanical properties of different high strength carbon steels after hot stamping, Journal of Materials Processing Technology, 2011, Vol. 211, pp. 1117-1125
Semi-hot stamping as an improved process of hot stamping, Journal of Materials Science and Technology, 2011, Vol. 27, pp. 369-376
Identification of GTN model parameters by application of response surface methodology, Procedia Engineering, 2011, Vol. 10, 415-420
Analysis of microstructure and mechanical properties of different boron and non-boron alloyed steels after being hot stamped, Procedia Engineering, 2011, Vol. 10, pp. 460-465
A new concept in obtaining forming limit diagram of tailor welded blanks, Journal of Strain analysis for Engineering Design, 2011, Vol. 46, pp. 740-748
Obtaining high formability of If-galvanized steel tailor welded blanks by applying optimum CO2 laser welding parameters, International Journal of Materials Research, 2011, Vol. 102, pp. 1295-1302
Investigation into wall wrinkling in the deep drawing process of conical cups, Journal of Materials Processing Technology, 2011, Vol. 211, pp. 1783-1795
Application of GTN model to predict forming limit diagram of IF-steel, Journal of Mechanical Science and Technology, 2012, Vol. 26, pp. 345-352
Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank, Computational Materials Science, 2012, Vol. 53, 368-376
Investigation into the effects of weld zone and geometric discontinuity on the formability reduction of tailor welded blanks, Computational Materials Science, 2012, Vol. 59, pp. 158-164
The effect of strain rate and deformation temperature on the characteristics of isothermally hot compressed boron-alloyed steel, Materials Science and Engineering A, 2012, Vol. 538, pp. 356-363
Failure analysis of DP600 steel during the cross-die test, Computational Materials Science, 2012, Vol. 64, pp. 101-105
New attempt to wrinkling behavior analysis of tailor welded blanks during the deep drawing process, Materials & Design, 2012, Vol. 40, pp. 407-414
Application of the GTN model to predict the forming limit diagram of IF-steel, Journal of Mechanical Science and Technology, 2012, Vol. 26, pp. 345-352
Investigation into tearing of tailor welded blanks, Steel research International, Special Edition: 14th International Conference, 583-586, 2012
Isothermal versus non-isothermal hot compression process: a comparative study on phase transformations and structure-property relationships, Materials & Design, 2013, Vol. 45, 1-5
Enhanced mechanical properties of a hot-stamped advanced high-strength steel via tempering treatment, Metallurgical and Materials Transactions A, 2013, DOI: 10.1007/s11661-01201546-1
Numerical investigation into the effects of pin angle and preheating on temperature distribution during friction stir welding operation, Transactions of Nonferrous Metals Society of China, Vol. 23, 2013
The Effect of SiC/Al2O3 Particles Used during FSP on Mechanical Properties of AZ91 Magnesium Alloy, International Journal of Materials Research, , Vol. 105, 2014, pp. 369-374
Effect of cooling rate on mechanical properties of 7075 aluminum rods extruded in semi-solid state, Journal of Engineering Materials and Technology, Vol. 136, 201, pp.1115, -1123
Analytical method for prediction of weld line movement during stretch forming of tailor welded blanks, International Journal of Advanced Manufacturing Technology, 2014, Vol. 72, pp. 170-184
Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties, International Journal of Materials Research , 2014, Vol. 4, pp. 1-6
Thermal Analysis of Friction Stir Welding Process and Investigation into Affective Parameters Using Simulation, Journal of Mechanical Science and Technology, 2015, Vol. 29, pp. 861-866
The effect of FSP on mechanical , tribological and corrosion behavior of magnesium AZ91 alloy, International Journal of Advanced Manufacturing Technology, 2015, Vol. 77, pp. 2051-2058
Characterization of microstructure and mechanical properties of resistance spot welded DP600 steel, Metals, 2015, Vol. 5, pp. 1704-1716
The effect of SiC particle addition during FSW on microstructure and mechanical properties of AZ31 magnesium alloy, Journal of Materials Engineering and Performance, 2015, Vol. 24, pp. 5037-5045
The effect of martensite banding on the mechanical properties and formability of TRIP steels, Materials Science and Engineering A, 2016, Vol. 651, pp. 160-164
Incorporation of SiC particles in FS welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance, 2016, Vol. 107, pp. 566-572
Development and application of a microstructure-based approach to characterize and model failure initiation in DP steels using XFEM, Materials Science and Engineering A, 2016, Vol. 660, pp. 181-194
Microstructures and mechanical properties of friction stir welded dissimilar steel-copper joints, Journal of Mechanical Science and Technology, 2017, Vol. 31, pp. 1135-1142
The effect of bake-hardening parameters on the mechanical properties of dual-phase steels, Steel Research International, 2016, Vol. 87, pp. 1-7
Friction stir welding vibration welding process: modified version of friction stir welding process, The International Journal of Advanced Manufacturing Technology, 2017, Vol. 90, pp. 141-151
The effect of aging on microstructure, formability and springback of Ti-6Al4V titanium alloy, Journal of Materials Engineering and Performance, 2017, Vol. 26, pp. 374-382
The effect of friction stir vibration welding process on characteristics of SiO2 incorporated joint, Journal of Materials Processing Technology, 2017, Vol. 243, pp. 23-30
Structural evaluation and mechanical properties of AZ31/SiC nano-composite produced by friction stir welding process at various welding speeds, Part L: Journal of Materials: Design and Applications, 2017, DOI: 10.1177/1464420717708485
New method to improve the microstructure and mechanical properties of joint obtained using FSW, The International Journal of Advanced Manufacturing Technology, 2017, Vol. 93, pp. 4371-4378.
The effect of vibration during friction stir welding on corrosion behavior, mechanical properties, and machining characteristics of stir zone, Metals, 2017, 7, doi: 10.3390/met7100421.
Friction stir vibration processing: A new method to improve the microstructure and mechanical properties of Al5052/SiC surface nano-composite layer, International Journal of Advanced Manufacturing Technology, 2018, Vol. 93, pp. 4371-4378.
Investigation into microstructure and mechanical characteristics of AA6061-T6 joints made by FSW, FSVW, and TIG: A comparative study, International Journal of Minerals, Metallurgy and Materials , doi: 0.1007/s12613-020-2085-1.
Effect of Water Cooling and Vibration on the Performances of Friction-Stir-Welded AA5083 Aluminum Joints, Metallography, Microstructure, and Analysis, 0.1007/s13632-019-00606-4.
Mechanical Behavior and Microstructure of AA6061-T6 Joints Made by Friction Stir Vibration Welding, Journal of Materials Engineering and Performance, doi:10.1007/s11665-020-04639-7.
Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics, Advances In Manufacturing, doi:10.1007/s40436-019-00288-9.
Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP, Transactions of Nonferrous Metals Society of China, doi:10.1016/S1003-6326(20)65264-5.
Effect of vibration on machining and mechanical properties of AZ91 alloy during FSP: modeling and experiments, International Journal of Material Forming, doi: 0.1007/s12289-020-01551-2.
The investigation into vibration effect on microstructure and mechanical characteristics of friction stir spot vibration welded aluminum: Simulation and experiment, Journal of Mechanical Engineering Science, doi: 0.1177/0954406219900194.
New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas, Journal of Engineering Manufacture, doi: 10.1177/0954405420929777.
A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites, International Journal of Minerals, Metallurgy and Materials, doi: 10.1007/s12613-020-1993-4.
Comparison of different welding methods on mechanical properties and formability behaviors of tailor welded blanks (TWB) made from AA6061 alloys, Journal of Mechanical Engineering Science, doi: 10.1177/0954406220952504.
Numerical analysis of vibration effect on friction stir welding by smoothed particle hydrodynamics (SPH), The International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-020-05839-0.
Numerical analysis of cooling and joining speed effects on friction stir welding by smoothed particle hydrodynamics (SPH), Archive of Applied Mechanics, doi: 10.1007/s00419-020-01720-4.