Analytical study of parameters affecting entropy generation of nanofluid turbulent flow in channel and micro-channel

نویسندگانG.A. Sheikhzadeh, A. Aghaei, H.R. Ehteram, M. Abbaszadeh
نشریهTHERMAL SCIENCE
ارائه به نام دانشگاهUniversity of Kashan
شماره صفحات2037-2050
شماره سریال6
شماره مجلد20
ضریب تاثیر (IF)1.097
نوع مقالهFull Paper
تاریخ انتشارJanuary 2016
رتبه نشریهISI
نوع نشریهچاپی
کشور محل چاپصربستان
نمایه نشریهISI

چکیده مقاله

In this study, thermo-physical and geometrical parameters affecting entropy generation of nanofluid turbulent flow such as the volume fraction, Reynolds number, and diameter of the channel and microchannel with circular cross-section under constant flux are examined analytically. Water is used as a base fluid of nanofluid with nanoparticles of Ag, Cu, CuO, and TiO2. The study is conducted for Reynolds numbers of 20000, 40000, and 100000, volume fractions of 0, 0.01, 0.02, 0.03, and 0.04, channel diameters of 2, 4, 6, and 8 cm and microchannel diameters of 20, 40, 60, and 80 micrometers. Based on the results, the most of the generated entropy in channel is due to heat transfer, and also, with increasing the diameter of the channel, Bejan number increases. The contribution of entropy generation due to heat transfer in the microchannel is very poor and the major contribution of entropy generation is due to friction. The maximum amount of entropy generation in channel belongs to nanofluids with Ag, Cu, CuO, and TiO2 nanoparticles, respectively, while in the microchannel this behavior is reversed, and the minimum entropy generation happens in nanofluids with Ag, Cu, CuO, and TiO2 nanoparticles, respectively. In channel and microchannel, for all nanofluids except for the water-TiO2, with increasing volume fraction of nanoparticles, the entropy generation decreases. In channel and microchannel, the total entropy generation increases as Reynolds number augments.

لینک ثابت مقاله