| نویسندگان | Behrouz Mozafari, Ali Akbar Abbasian Arani, Ghanbar Ali Sheikhzadeh, Mahmoud Salimi |
|---|---|
| نشریه | International Journal of Numerical Methods for Heat and Fluid Flow |
| ارائه به نام دانشگاه | University of Kashan |
| ضریب تاثیر (IF) | 1.958 |
| نوع مقاله | Full Paper |
| تاریخ انتشار | June 2019 |
| رتبه نشریه | ISI |
| نوع نشریه | چاپی |
| کشور محل چاپ | بریتانیا |
چکیده مقاله
Purpose The purpose of this paper is to study the effects of using different Brownian models on natural and mixed convection fluid flow and heat transfer inside the square enclosure filled with the AlOOH–water nanofluid. Design/methodology/approach Due to fulfill of this demand, five different models for the effective thermal conductivity and viscosity of the nanofluid are considered. The following results are presented for the Ra=10⁷ to 10¹⁰ and Ri=0.01 to 100, whereas the volume fraction of the nanoparticles is varied from φ = 0.01 to 0.04. Findings According to the obtained results, increasing of Rayleigh number and reduction of Richardson number leads to the higher values of the average Nusselt number and entropy generation. Also, it is realized that, variation trend of the average Nusselt number and entropy generation in all cases is increasing by growing the volume fraction. It is found that the obtained average Nusselt numbers and entropy generations with Koo and Kleinstreuer are the highest among all the studied cases, and it is followed by Patel, Vajjha and Das, Corcione and Maxwell–Brinkman models, respectively. Originality/value Based on the results of present investigation, the Nusselt number difference predicted between the Maxwell–Brinkman model (as constant-property model) and Koo and Kleinstreuer model is about 7.84 per cent at 0.01 per cent volume fraction and 5.47 per cent at 0.04 per cent volume fraction for the Rayleigh number equal to 107. The entropy generation difference predicted between the two above studied model is about 8.05 per cent at 0.01 per cent volume fraction and 5.86 per cent at 0.04 per cent volume fraction for the Rayleigh number equal to 107. It is observed that using constant-property model has a sign