۱ | Free vibration analysis of micro and nano fibermetal laminates circular cylindrical shells based on modified couple stress theory | احمدرضا قاسمی,مسعود مهندس | MECH ADV MATER STRUC | 0000-00-11 |
۲ | Physicochemical and Mechanical Properties of Epoxy/Polyurethane/ Nickel Manganite Nanocomposite: A Response Surface Methodology/ Central Composite Designs Study | نیره شبانی ارمکی,مسعود همدانیان,احمدرضا قاسمی,مرضیه سرافرازی | J INORG ORGANOMET P | 0000-00-11 |
۳ | Simulation of Central Hole Drilling Process for Determining the Residual Stresses in Isotropic Materials | Shokrieh, M. M.- Ghasemi, A. R | International Journal of Engineering Science | 1385 |
۴ | Effects of Free Edge Interlaminar Shear Stress on the Residual Stresses of Polymer Composites Using Hole Drilling Method | Shokrieh, M. M.- Ghasemi, A. R | Journal of Polymer Science and Technology | 1386 |
۵ | Development of an Integral Method for Determination of Non-uniform Residual Stresses in Laminated Composites | Ghasemi, A. R.- Shokrieh, M. M | Journal of Polymer Science and Technology | 1387 |
۶ | Effect of Residual Thermal Stresses in Curing Process on the Deformation of Flat and Cylindrical Composite Laminates | Ghasemi, A. R.- Yasami, A | Journal of Polymer Science and Technology | 1388 |
۷ | Residual Strains Measurement and Calculating Residual Stresses in Composite Laminates Using the Integral Method | Ghasemi, A. R.- Shokrieh, M. M | Journal of Computational Methods in Engineering | 1388 |
۸ | Analytical and Numerical Studies of the Effect of Impact Forces on Polymer/Clay Nanocomposites | Ghasemi, A. R.- Karimi, A.H | Journal of Polymer Science and Technology | 1389 |
۹ | Analytical and Numerical Determination of Residual Stresses in Thick Composite Laminated Plates | Ghasemi, A. R.- Mashhadi. H. A | International Journal of Advanced Design and Manufacturing Technology | 1390 |
۱۰ | Optimization of Stacking Sequence for Buckling Load Using the Response Surface Method and Genetic Algoritms in Laminated Composite Materials | Ghasemi, A. R.- Hajmohammad, M.H | Journal of Computational Methods in Engineering | 1391 |
۱۱ | Analytical and Experimental Studies of Cyclic Thermal Shock Effects on Nonlinear Behavior of Composite Laminates | Ghasemi, A. R.- Baghersad, R | Journal of Aeronautical Engineering | 1391 |
۱۲ | Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses | Ghasemi, A. R.- Baghersad, R.- Vaziri Sereshk, M.R | Journal of Polymer Science and Technology | 1391 |
۱۳ | اثرات دما و زاویه الیاف در توزیع تنش و کرنش خزشی بلندمدت در استوانه کامپوزیتی چندلایه با الیاف تکجهته | احمدرضا قاسمی,کمیل حسین پور | نشریه علمی پژوهشی علوم و فناوری کامپوزیت | 1395/08/21 |
۱۴ | تحلیل اثرات سوراخ دایره ای و سیکل حرارتی روی خواص مکانیکی در چندلایه های کامپوزیتی پایه پلیمری تقویت شده با ذرات نانو | احمدرضا قاسمی,حامد خبازکاشانی | مهندسی مکانیک مدرس | 1397/10/15 |
۱۵ | محاسبه تنش های پسماند به وسیله اندازه گیری کرنش های رهاشده با استفاده از تقریب های متفاوت خطی و غیرخطی | احمدرضا قاسمی,سیده سارا امیراحمدی,بهزاد اصغری,محمدرضا ساربان | مهندسی مکانیک مدرس | 1397/12/10 |
۱۶ | تحلیل تنش های بین لایه ای در تیرهای کامپوزیتی بر روی بستر الاستیک با استفاده از فنرهای افقی و عمودی | احمدرضا قاسمی,مجتبی قاسمی | مجله مهندسی مکانیک دانشگاه تبریز | 1397/12/25 |
۱۷ | بهبود کیفیت ماشینکار ی کامپوزیتهای زمینهپلیمر ی تقویتشده با ذرات نانولوله کربنی تحت شرایط خستگی حرارتی | محمد براهنی,علی طباطبائیان,احمدرضا قاسمی,سعید امینی | مهندسی مکانیک مدرس | 1399/04/30 |
۱۸ | Determination of Calibration Factors of the Hole Drilling Method for Orthotropic Composites using an Exact Solution | Shokrieh, M. M.- Ghasemi A. R | Journal of Composite Materials | 2007 |
۱۹ | Simulation of Central Hole Drilling Process for Measurement of Residual Stresses in Isotropic, Orthotropic, and Laminated Composite Plates | Shokrieh, M. M.- Ghasemi A. R | Journal of Composite Materials | 2007 |
۲۰ | Measurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole | Ghasemi, A. R.- Razavian I | Journal of Solid Mechanics | 2012 |