مقالات در نشریات

#عنوان مقالهنویسندگاننشریهتاریخ انتشار
 
۱اثرات دما و زاویه الیاف در توزیع تنش و کرنش خزشی بلندمدت در استوانه کامپوزیتی چندلایه با الیاف تک‌جهتهاحمدرضا قاسمی,کمیل حسین پورنشریه علمی پژوهشی علوم و فناوری کامپوزیت1395/08/21
۲تحلیل اثرات سوراخ دایره ای و سیکل حرارتی روی خواص مکانیکی در چندلایه های کامپوزیتی پایه پلیمری تقویت شده با ذرات نانواحمدرضا قاسمی,حامد خبازکاشانیمهندسی مکانیک مدرس1397/10/15
۳محاسبه تنش های پسماند به وسیله اندازه گیری کرنش های رهاشده با استفاده از تقریب های متفاوت خطی و غیرخطیاحمدرضا قاسمی,سیده سارا امیراحمدی,بهزاد اصغری,محمدرضا ساربانمهندسی مکانیک مدرس1397/12/10
۴بهبود کیفیت ماشینکار ی کامپوزیتهای زمینهپلیمر ی تقویتشده با ذرات نانولوله کربنی تحت شرایط خستگی حرارتیمحمد براهنی,علی طباطبائیان,احمدرضا قاسمی,سعید امینیمهندسی مکانیک مدرس1399/04/30
۵تحلیل تنش های بین لایه ای در تیرهای کامپوزیتی بر روی بستر الاستیک با استفاده از فنرهای افقی و عمودیاحمدرضا قاسمی,مجتبی قاسمیمجله مهندسی مکانیک دانشگاه تبریز1397/12/25
۶Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects.Heidari-Rarani, M.- Ghasemi, A. RTheoretical and Applied Fracture Mechanics2017
۷Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects.M. A. Moazam-Ghasemi, A. R.- Honarpisheh, MTarbiat Modares University2017
۸Multi-objective optimization of laminated composite shells for minimum mass/cost and maximum buckling pressure with failure criteria under external hydrostatic pressureGhasemi, A. R.- Hajmohammad, M. HStructural and Multidisciplinary Optimization2017
۹Investigations on dynamic analysis and free vibration of FGMs rotating circular cylindrical shellsاحمدرضا قاسمی,محمد مسکینی کارمزدیSN Applied Sciences2019-04-16
۱۰Modeling creep behavior of carbon nanotube/fiber/polymer composite cylindersاحمدرضا قاسمی,کمیل حسین پور,مسعود مهندسProceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems2018
۱۱Molecular dynamics simulation and thermo-mechanical characterization for optimization of three-phase epoxy/TiO2/SiO2 nano-compositesGhasemi, A. R.-Hamadanian, M.-Sarafrazi, M.-Najafidoust, APolymer Testing2021
۱۲Effect of thermal cycling and open-hole size on mechanical properties of polymer matrix composites.Ghasemi, A. R- Moradi, MPolymer Testing2017
۱۳Failure analysis of the Nol‐ring polymer matrix composites under thermal cycling.Ghasemi, A. R.- Moradi, MPolymer Composites2017
۱۴Specification of non-uniform residual stresses and tensile characteristic in laminated composite materials exposed to simulated space environmentعلی طباطبائیان,احمدرضا قاسمی,بهزاد اصغریPOLYM TEST2019-10-09
۱۵Optimization of thermo-mechanical and antibacterial properties of epoxy/ polyethylene glycol/MWCNTs nano-composites using response surface methodology and investigation thermal cycling fatigueمهدی اشرفی,احمدرضا قاسمی,مسعود همدانیانPOLYM TEST2019-09-01
۱۶Improvement Mechanical and Antibacterial Properties of Epoxy by Polyethylene Glycol and Ag/CuO Nanoparticlesمهدی اشرفی,مسعود همدانیان,احمدرضا قاسمی,فرشته جوکارکاشیPOLYM COMPOSITE2019-02-26
۱۷The impact of MWCNT modification on the structural performance of polymeric composite profilesعلی طباطبائیان,احمدرضا قاسمیPOLYM BULL2020-01-01
۱۸Influence of different parameters on cured shapes and residual stresses of unsymmetric composite laminate reinforced by multi‑wall carbon nanotubesاحمدرضا قاسمی,محمد محمدی فشارکیPOLYM BULL2019-01-14
۱۹Applications of the Incremental Hole-Drilling Method for Measurement of Non-uniform Residual Stresses in Fiber Metal LaminatesGhasemi, A. R.- Mohammadi, M. MModares Mechanical Engineering2015
۲۰Low thermal cycling effects on mechanical properties of laminated composite materialsGhasemi, A. R.- Moradi, M.Mechanics of Materials 962016
نمایش ۱ تا ۲۰ مورد از کل ۹۹ مورد.