مقالات پژوهشی

145- M. Aghili, M. Barati, and M. Hamadanian, “Supercritical microalgae conversion to biofuel and value-added components (oxygenates, hydrocarbons, and aromatics): A catalyst characterization study”, accepted in Environmental Progress & Sustainable Energy, 2023, DOI:10.1002/ep.14326.

144- M. Hamadanian, M. Keshavarz, and E. Shahrousvand, “The reliable predicting refractive index for diverse polymers only from structural moieties in repeating unit structures”, Materials Today Communications, 35 (2023) 105823.

143- S Katebi Koushali and M Hamadanian, “Improvement of Neurite Outgrowth in PC12 Cells by TiO₂, Au/TiO₂ and Ag/TiO₂ Nanoparticles”, Journal of Nanostructures 13 (2023), 325-340.

142- M. Hassanpour, M. Hamadanian, Omid Amiri, S.A. Hosseini Tafreshi, M. Salavati-Niasari, “Sonochemical synthesis and characterization of aluminum tungsten oxide nanoparticle and study its impact on the growth of microalga”, Arabian Journal of Chemistry 15 (2022) 103671.

141- S. Moshtaghi, M. Hamadanian and M. Salavati-Niasari, “A simple hydrothermal route for the preparation of novel Na–Y–W nano-oxides and their application in dye degradation”, RSC Adv. 12 (2022) 4913-4923.

140- S. Moshtaghi, M. Hamadanian, Omid Amiri, M. Goli, M. Salavati-Niasari, “Controllable synthesis and characterization of Mg₂SiO₄ nanostructures via a simple hydrothermal route using carboxylic acid as capping agent and their photocatalytic performance for photodegradation of azo dyes”, RSC Adv. 11 (2021) 21588-21599.

139- M.H. Hadizadeh and M. Hamadanian, “Evaluation of corrosion inhibition efficiency of some novel Schiff bases through a proposed QSAR model: DFT investigations supported by weight loss technique”, Int. J. Corros. Scale Inhib. 10 (2021) 1516–1530.

138- M. Hassanpour, S.A. Hosseini Tafreshi, O. Amiri, M. Hamadanian, M. Salavati-Niasari, “Toxicity of Nd₂WO₆ nanoparticles to the microalga Dunaliella salina: synthesis of nanoparticles and investigation of their impact on microalgae”, RSC Adv. 11 (2021) 27283–27291.

137- F. Fotouhi-Far, H. Bashiri, M. Hamadanian, M.H. Keshavarz, “A New Approach for the Leaching of Palladium from Spent Pd/C Catalyst in HCl–H₂O₂ System”, Protection of Metals and Physical Chemistry of Surfaces 57(2) (2021) 297–305.

136- M. Ashraf, M, Hamadanian, A.R. Ghasemi, “Epoxy/Polyethylene Glycol/TiO₂: Design, Fabrication and Investigation of Mechanical Properties, Thermal Cycling Fatigue and Antibacterial Activity”, Journal of Polymers and the Environment 29 (2021) 3867–3877.

135- S. Katebi Koushali, M. Hamadanian, A.R. Ghasemi, M. Ashrafi, “Investigation of Mechanical Properties of Polyester/Polyethylene Glycol/TiO₂ Nanocomposites”, J. Nanostruct. 11(1) (2021) 38-47.

134- M. Sarafrazi, A.R. Ghasemi, M. Hamadanian, “Optimization of Curing Conditions and Effect of Plasticizer Amount on the Mechanical and thermal Properties of Epoxy resin”, Iran J. Polym. Sci. Tech. 33(6) (2021) 479-495.

133- M. Sarafrazi, A.R. Ghasemi, M. Hamadanian, “A Semi-analytical and Experimental Approach Using Molecular Dynamic Simulation for Thermo-mechanical Properties of Surface Functionalized Epoxy/Polyurethane/MWCNT/ZnMoO₄ Nanocomposites”, Fibers and Polymers 22(8) 2021 2306-2315.

132- M. Hassanpour, S.A. Hosseini Tafreshi, M. Salavati-Niasari, M. Hamadanian, “Toxicity evaluation and preparation of CoWO₄ nanoparticles towards microalga Dunaliella salina”, Environ. Sci. Pollut. Res. 28 (2021) 36314–36325.

131- A. Takari, A.R. Ghasemi, M. Hamadanian, M. Sarafrazi, A. Najafidoust, “Molecular dynamics simulation and thermo-mechanical characterization for optimization of three-phase epoxy/TiO₂/SiO₂ nano-composites”, Polymer Testing 93(2021) 106890.

130- A. Fathollahi Zonouz, M. Ashrafi, M. Ghiyasiyan-Arani, M. Hamadanian, “Effect of sol–gel synthesized Al_0.1Zr_0.9O_1.95 nanoparticles and PVP on PVDF-based separators in lithium-ion battery performance: The RSM study”, Journal of Elastomers & Plastics 53(3) (2021) 241–257.

129- S. Khademi, M. Hamadanian, B. Roozbehani, N. Khademi, “Synthesis and characterization of high flux and antibacterial film nanocomposite based on epoxy-zeolite NaA”, Journal of Nanostructures 10 (2020) 177-184.

128- M. Sarafrazi, A.R. Ghasemi, M. Hamadanian, “Synergistic effect between CuCr₂O₄ nanoparticles and plasticizer on mechanical properties of EP/PU/CuCr₂O₄ nanocomposites: Experimental approach and molecular dynamics simulation”, Journal of Applied Polymer Science, 137 (46) (2020) 49425.

127- M. Hassanpour, S.A. Hosseini Tafreshi, O. Amiri, M. Hamadanian, M. Salavati-Niasari, “Toxic effects of Fe₂WO₆ nanoparticles towards microalga Dunaliella salina: Sonochemical synthesis nanoparticles and investigate its impact on the growth”, Chemosphere, 258 (2020) Article 127348.

126- M. Aghilinategh, M. Barati, M. Hamadanian, “The modified supercritical media for one-pot biodiesel production from Chlorella vulgaris using photochemically-synthetized SrTiO₃ nanocatalyst”, Renewable Energy, 160 (2020) 176-184.

125- S. Mirsafai, K. Torabi, M. Ashrafi, M. Hamadanian, “Tensile strength and elongation of NBR/PVC/CuFe₂O₄ magnetic nanocomposites: a response surface methodology optimization”, Bull. Mater. Sci., 43 (2020) Article number 101.

124- N. Shabani, A.R. Ghasemi, M. Hamadanian, “Ultrasonic-assisted rapid preparation of three-phase nanocomposites: The effects of zinc manganite nanoparticles and polyurethane on the thermomechanical, physicochemical, and antibacterial properties of polymer matrix composites”, Journal of Elastomers & Plastics, 52 (7) (2020) 620-644.

123- Pourya Mehdizadeh, Z. Tavangar, N. Shabani, M. Hamadanian, “Visible light activity of nitrogen-doped TiO₂ by sol-gel method using various nitrogen sources”, Journal of Nanostructures, 10(2) (2020) 307-316.

122- S. Tahmasebi, Z. Tavangar, M. Hamadanian, “Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum Natural Dyes in Making Dyesensitized Solar Cells”, Advanced Materials & Novel Coatings, 32 (2020) 2346-2356.

121- S.K. Nasiri, A. Reisi-Vanani, M. Hamadanian, “Molecular Structure, Spectroscopic, Local and Global Reactivity Descriptors and NBO Analysis of C₃₂H₁₂: A New Buckybowl and Sub-Fullerene Structure”, Polycyclic Aromatic Compounds 40(3) (2020) 693-704.

120- H. Mohammad-Salehi, M. Hamadanian, H. Safardoust-Hojaghan, “Visible-Light Induced Photodegradation of Methyl Orange via Palladium Nanoparticles Anchored to Chrome and Nitrogen Doped TiO₂ Nanoparticles”, Journal of Inorganic and Organometallic Polymers and Materials 29 (2019) 1457–1465.

119- A. Abbasi, M. Hamadanian, T. Gholami, M. Salavati-Niasari, N. Sadri, “Facile preparation of PbCrO₄ and PbCrO₄/Ag nanostructure as an effective photocatalyst for degradation of organic contaminants”, Separation and Purification Technology 209 (2019) 79-87.

118- H. Sayahi, F. Mohsenzadeh, M. Hamadanian, “Cost-effective fabrication of perdurable electrodeposited TiO₂ nano-layers on stainless steel electrodes applicable to photocatalytic degradation of methylene blue”, Research on Chemical Intermediates 45 (2019) 4275-4286.

117- M Ashrafi, AR Ghasemi, M Hamadanian, “Optimization of thermo-mechanical and antibacterial properties of epoxy/polyethylene glycol/MWCNTs nano-composites using response surface methodology and investigation thermal cycling fatigue”, Polymer Testing 78 (2019) 105946.

116- M. Ashrafi, M. Hamadanian, A.R. Ghasemi, F. Jookar-Kashi, “Improvement Mechanical and Antibacterial Properties of Epoxy by Polyethylene Glycol and Ag/CuO Nanoparticles”, Polymer composites (2019) 3393-3401.

115- M. Sarafrazi, M. Hamadanian, A.R. Ghasemi, “Optimize epoxy matrix with RSM/CCD method and influence of multi-wall carbon nanotube on mechanical properties of epoxy/polyurethane”, Mechanics of Materials 138 (2019) 103154.

114- M. Rotami, M. Hamadanian, M. Rahimi-Nasrabadi, M.R. Ganjali, “Sol–gel preparation of metal and nonmetal-codoped TiO₂–graphene nanophotocatalyst for photodegradation of MO under UV and visible-light irradiation”, Ionics 25 (2019) 1869-1878.

113- M. Ashrafi, M. Hamadanian, S. Mirsafai, K. Torabi, “Investigation and Optimization of Mechanical Properties of Nitrile-Butadiene Rubber/Polyvinyl Chloride/NiFe₂O₄ Nanocomposite”, Fibers and Polymers 20 (2019) 2247-2253.

112- A. Dourani, M. Haghgoo, M. Hamadanian, “Multi-walled carbon nanotube and carbon nanofiber/polyacrylonitrile aerogel scaffolds for enhanced epoxy resins”, Composites Part B: Engineering 176 (2019) 107299.

111- A. Abbasi, S.M.S. Sajadi, O. Amiri, M. Hamadanian, H. Moayedi, M. Salavati-Niasari, M. Mohammad Beigi, “MgCr₂O₄ and MgCr₂O₄/Ag nanostructures: Facile size-controlled synthesis and their photocatalytic performance for destruction of organic contaminants”, ‏‎Composites Part B: Engineering 175 (2019) 107077.

110- M. Aghilinategh, M. Barati, M. Hamadanian, “Supercritical methanol for one put biodiesel production from chlorella vulgaris microalgae in the presence of CaO/TiO₂ nano-photocatalyst and subcritical water”, Biomass and Bioenergy 123 (2019) 34-40.

109- M.P. Mazhari, M. Hamadanian, M. Mehipour, V. Jabbari, “Central composite design (CCD) optimized synthesis of Fe₃O₄@ SiO₂@ AgCl/Ag/Ag₂S as a novel magnetic nano-photocatalyst for catalytic degradation of organic pollutants”, Journal of environmental chemical engineering 6 (2018) 7284-7293.

108- M. Sarsabili, R. Rahmatolahzadeh, S.A. Shobeiri, M. Hamadanian, A. Farazin, K. Khezri, “Reverse atom transfer radical random copolymerization of styrene and methyl methacrylate in the presence of diatomite nanoplatelets”, Polymers for Advanced Technologies 29 (2018) 424-432.

107- A. Abbasi, H. Khojasteh, M. Hamadanian, M. Salavati-Niasari, “Normal spinel CdCr₂O₄ and CdCr₂O₄/Ag nanocomposite as novel photocatalysts, for degradation of water contaminates”, Separation and Purification Technology 195 (2018) 37-49.

106- M. Hassanpour, ,M. Salavati-Niasari, S.A. Mousavi, H. Safardoust-Hojaghan, M. Hamadanian, “CeO₂/ZnO ceramic nanocomposites, synthesized via microwave method and used for decolorization of dye”, Journal of Nanostructures 8 (2018) 97-106.

105- S.A. Mousavi, M. Hassanpour, M. Salavati-Niasari, H. Safardoust-Hojaghan, M. Hamadanian, “Dy₂O₃/CuO nanocomposites: microwave assisted synthesis and investigated photocatalytic properties”, Journal of Materials Science: Materials in Electronics 29 (2018) 1238-1245.

104- N. Shabani, M. Hamadanian, A.R. Ghasemi, M. Sarafrazi, “Physicochemical and Mechanical Properties of Epoxy/Polyurethane/Nickel Manganite Nanocomposite: A Response Surface Methodology/Central Composite Designs Study”, Journal of Inorganic and Organometallic Polymers and Materials 28 (2018) 2689-2700.

103- R. Rahmatolahzadeh, M. Hamadanian, H. Shagholani, S.R. Moosavikia, “Synthesis of Au/SiO₂ Nanoparticles with Highly Porous Structure as a pH-Sensitive Targeting Drug Carrier”, Journal of Inorganic and Organometallic Polymers and Materials 28 (2018) 187-194.

102- M.P. Mazhari, M. Hamadanian, “Preparation and Characterization of Fe₃O₄@SiO₂@TiO₂ and Ag/Fe₃O₄@SiO₂@TiO₂ Nanocomposites for Water Treatment: Process Optimization by Response Surface Methodology”, Journal of Electronic Materials 47 (2018) 7484-7496.

101- R. Rahmatolahzadeh, M. Hamadanian, L. Ma’mani, A. Shafiee, “Aspartic acid functionalized PEGylated MSN@GO hybrid as an effective and sustainable nano-system for in-vitro drug delivery”, Advances in medical sciences 63 (2018) 257-264.

100- A. Abbasi, M. Hamadanian, M. Salavati-Niasari, M.P. Mazhari, “Hydrothermal synthesis, characterization and photodegradation of organic pollutants of CoCr₂O₄/Ag nanostructure and thermal stability of epoxy acrylate nanocomposite”, Advanced Powder Technology 28 (2017) 2756-2765.

99- R. Rahmatolahzadeh, M. Hamadanian, L. Ma'mani, A. Shafiee, “Synthesis and characterization of pH-responsive nanocarrier based on PEGylated imidazolium ionic liquid MSN@GO for in-vitro curcumin delivery”, Research journal of pharmaceutical biological and chemical sciences 8 (2017) 1317-1328.

98- F. Fotouhi‐Far, H. Bashiri, M. Hamadanian, “Study of Deactivation of Pd(OH)₂/C Catalyst in Reductive Debenzylation of Hexabenzylhexaazaisowurtzitane”, Propellants, Explosives, Pyrotechnics 42 (2017) 213-219.

97- A. Dourani, M. Haghgoo, M. Hamadanian, R.M. Aghdam, “Effect of Carbon Nanotube Loading on Mechanical and Thermal Properties of Pure and Pyrolyzed Polyacrylonitrile Aerogel”, Journal of Nanoscience and Nanotechnology 17 (2017) 2959-2969.

96- M. Hamadanian, M. Rostami, V. Jabbari, “Graphene-supported C–N–S tridoped TiO₂ photo-catalyst with improved band gap and charge transfer properties”, Journal of Materials Science: Materials in Electronics 28 (2017) 15637-15646.

95- M. Salavati-Niasari, F. Soofivand, A. Sobhani-Nasab, M. Shakouri-Arani, M.Hamadanian, S. Bagheri, “Facile synthesis and characterization of CdTiO₃ nanoparticles by Pechini sol–gel method”, Journal of Materials Science: Materials in Electronics 28 (2017) 14965-14973.

94- S. Mortazavi-Derazkola, M. Salavati-Niasari, M.P. Mazhari, H. Khojasteh, M. Hamadanian, S. Bagheri, “Magnetically separable Fe₃O₄@SiO₂@TiO₂ nanostructures supported by neodymium(III): fabrication and enhanced photocatalytic activity for degradation of organic pollution”, Journal of Materials Science: Materials in Electronics 28 (2017) 14271-14281.

93- A. Abbasi, M. Hamadanian, M. Salavati-Niasari, S. Mortazavi-Derazkola, “Facile size-controlled preparation of highly photocatalytically active ZnCr₂O₄ and ZnCr₂O₄/Ag nanostructures for removal of organic contaminants”, Journal of colloid and interface science 500 (2017) 276-284.

92- F. Fotouhi-Far, H. Bashiri, M. Hamadanian, M.H. Keshavarz, “Increment of activity of Pd(OH)₂/C catalyst in order to improve the yield of high performance 2,4,6,8,10,12-hexanitrohexaazaisowurtzitane (HNIW)”, Inorganic and Nano-Metal Chemistry 47 (2017) 1489-1494.

91- Z. Tavangar, M. Hamadanian, H. Basharnavaz, “Studying the effects of the configuration of doped Al atoms on the conductive properties of boron nitride nanotube using density functional theory”, Chemical Physics Letters 669 (2017) 29-37.

90- H.A. Rafiee-Pour, M. Hamadanian, S. Katebi-Koushali, “Nanocrystalline TiO₂ films containing sulfur and gold: Synthesis, characterization and application to immobilize and direct electrochemistry of cytochrome c”, Applied Surface Science 363 (2016) 604-612.

89- F. Fotouhi‐Far, H. Bashiri, M. Hamadanian, M.H. Keshavarz, “A New Method for Assessment of Performing Mechanical Works of Energetic Compounds by the Cylinder Test”, Zeitschrift für anorganische und allgemeine Chemie 642 (2016) 1086-1090.

88- H. Khojasteh, M. Salavati-Niasari, M.P. Mazhari, M. Hamadanian, “Preparation and characterization of Fe₃O₄@SiO₂@TiO₂@Pd and Fe₃O₄@SiO₂@TiO₂@Pd–Ag nanocomposites and their utilization in enhanced degradation systems and rapid magnetic separation”, RSC Advances 6 (2016) 78043-78052.

87- V. Jabbari, M. Hamadanian, M. Shamshiri, D. Villagrán, “Band gap and Schottky barrier engineered photocatalyst with promising solar light activity for water remediation”, RSC Advances 6 (2016) 15678-15685.

86- M. Hamadanian, M.H. Keshavarz, B. Nazari, M. Mohebbi, “Reliable method for safety assessment of melting points of energetic compounds”, Process Safety and Environmental Protection 103 (2016) 10-22.

85- J. Safaei-Ghomi, R. Masoomi, M. Hamadanian, S. Naseh, “Magnetic nanoscale core–shell structured Fe₃O₄@ l-proline: an efficient, reusable and eco-friendly nanocatalyst for diastereoselective synthesis of fulleropyrrolidines”, New Journal of Chemistry 40 (2016) 3289-3299.

84- M. Hamadanian, S. Karimzadeh, V. Jabbari, D. Villagrán, “Synthesis of cysteine, cobalt and copper-doped TiO₂ nanophotocatalysts with excellent visible-light-induced photocatalytic activity”, Materials Science in Semiconductor Processing 41 (2016) 168-176.

83- M. Hamadanian, Z. Tavangar, S. Naseh, “The modification of benzene adsorption on zigzag single-wall carbon nanotubes by carboxylation”, Materials Research Express 3 (2016) 125010

82- Z. Tavangar, M. Hamadanian, H. Basharnavaz, “Variation of the electronic properties of zigzag boron nitride nanotubes by Al-doping: a DFT study”, Molecular Physics 114 (2016) 2936-2943.

81- G. Kianpour, F. Soofivand, M. Badiei, M. Salavati-Niasari, M. Hamadanian, “Facile synthesis and characterization of nickel molybdate nanorods as an effective photocatalyst by co-precipitation method”, Journal of Materials Science: Materials in Electronics 27 (2016) 10244-10251.

80- S. Ayni, M. Sabet, M. Salavati-Niasari, M. Hamadanian, “Synthesis and characterization of cerium molybdate nanostructures via a simple solvothermal method and investigation of their photocatalytic activity”, Journal of Materials Science: Materials in Electronics 27 (2016) 7342-7352.

79- A. Abbasi, H. Khojasteh, M. Hamadanian, M. Salavati-Niasari, “Synthesis of CoFe₂O₄ nanoparticles and investigation of the temperature, surfactant, capping agent and time effects on the size and magnetic properties”, Journal of Materials Science: Materials in Electronics 27 (2016) 4972-4980.

78- A. Abbasi, D. Ghanbari, M. Salavati-Niasari, M. Hamadanian, “Photo-degradation of methylene blue: photocatalyst and magnetic investigation of Fe₂O₃–TiO₂ nanoparticles and nanocomposites”, Journal of Materials Science: Materials in Electronics 27 (2016) 4800-4809.

77- S. Zinatloo-Ajabshir, M. Salavati-Niasari, M. Hamadanian, “Preparation of nanocrystalline praseodymium oxide with different shapes via a simple thermal decomposition route”, Journal of Materials Science: Materials in Electronics 27 (2016) 998-1006.

76- T. Gholami, M. Bazarganipour, M. Salavati-Niasari, N. Mir, M. Hamadanian, S. Bagheri, “Considering the effect of a ligand as new complexing agent in the characteristics of TiO₂ nanoparticles”, Journal of Molecular Liquids 215 (2016) 467-471.

75- V. Jabbari, M. Hamadanian, S. Karimzadeh, D. Villagrán, “Enhanced charge carrier efficiency and solar light-induced photocatalytic activity of TiO₂ nanoparticles through doping of silver nanoclusters and C–N–S nonmetals”, Journal of industrial and engineering chemistry 35 (2016)132-139.

74- Z. Mousavi, M. Salavati-Niasari, F. Soofivand, M. Esmaeili-Zare, M. Hamadanian, “Synthesis and characterization of hydrophilic and semiconductor cadmium chromite nanostructures”, Journal of Electronic Materials 45 (2016) 5739-5745.

73- B. Nazari, M.H. Keshavarz, M. Hamadanian, S. Mosavi, A.R. Ghaedsharafi, H.R. Pouretedal, “Reliable prediction of the condensed (solid or liquid) phase enthalpy of formation of organic energetic materials at 298 K through their molecular structures”, Fluid Phase Equilibria 408 (2016) 248-258.

72- B. Nazari, M. Hamadanian, M.H. Keshavarz, J. Rezaei, “New method for assessment of melting points of organic azides using their molecular structures”, Fluid Phase Equilibria 427 (2016) 27-34.

71- S. Nasiri-Kokhdan, A. Reisi-Vanani, M. Hamadanian, “Ab initio and TD-DFT study of the structural and spectroscopic properties of C30H10 as a new buck bowl”, Fullerenes, Nanotubes and Carbon Nanostructures 24 (2016) 577-587.

70- A. Reisi-Vanani, M. Hamadanian, S. Nasiri-Kokhdan, “Functionalization of the sumanene by nitrous oxide: A mechanistic study”, Computational and Theoretical Chemistry 1082 (2016) 49-57.

69- A. Reisi-Vanani, M. Hamadanian, S. Nasiri-Kokhdan, “Comprehensive theoretical study of the phenyl azide addition onto armchair (5, 5) single wall carbon nanotube”, Computational and Theoretical Chemistry 1075 (2016) 38-46.

68- M. Hamadanian, Z. Tavangar, S. Naseh, ”Improvement of electronic properties of carboxylated zigzag single wall carbon nanotubes by interaction with benzene derivatives”, Current Applied Physics 15 (2015) 1593-1598.

67- V. Jabbari, M. Hamadanian, A. Reisi-Vanani, P. Razi, S. Hoseinifard, D. Villagr´an, “In, V-codoped TiO₂ nanocomposite prepared via a photochemical reduction technique as a novel high efficiency visible-light-driven nanophotocatalyst”, RSC Advances 5 (2015) 78128-78135.

66- A. Dourani, M. Hamadanian, M. Haghgoo, M.R. Jahannama, H. Goudarzi, “Morphology and electrical properties of multi-walled carbon nanotube/carbon aerogel prepared by using polyacrylonitrile as precursor”, RSC Advances 5 (2015) 49944-49952.

65- S. Zinatloo-Ajabshir, M. Salavati-Niasari, M. Hamadanian, “Praseodymium oxide nanostructures: novel solvent-less preparation, characterization and investigation of their optical and photocatalytic properties”, RSC Advances 5 (2015) 33792-33800.

64- M. Shabani-Nooshabadi, M. Behpour, F.S. Razavi, M. Hamadanian, V. Nejadshafiee, “Study of N-benzylidene derivatives synthesized as corrosion inhibitors for copper in HCl solution”, RSC Advances 5 (2015) 23357-23366.

63- A. Ehteram, M. Hamadanian, V. Jabbari, “Fabrication of Novel High Potential Chromium-Doped TiO₂ Nanoparticulate Electrode-based Dye-Sensitized Solar Cell (DSSC)”, Journal of Nanostructures 5 (2015) 443-453.

62- L. Nejaty-Moghadam, A. Esmaeili-Bafghi-Karimabad, S. Gholamrezaei, M. Hamadanian, M. Salavati-Niasari, ”Facile synthesis of GeO₂ nanostructures and measurement of photocatalytic, photovoltaic and photoluminescence properties”, Journal of Materials Science: Materials in Electronics 26 (2015) 6386-6394.

61- M. Hamadanian, M.H. Keshavarz, B. Nazari, M. Mohebbi, ”Simple approach for prediction of melting points of organic molecules containing hazardous peroxide bonds”, Journal Iranian chemical society 12 (2015) 587–598.

60- H. Sayahi, M. Hamadanian, F. Mohsenzadeh, K. Aghapoor, M.A. Kiani, ”Enhanced Efficiency of Dye–sensitized Solar Cells Based on Bulk Synthesized TiO₂ Nanorods Annealed at Different Temperatures”, Journal of the Chinese Chemical Society 62 (2015) 811-816.

59- M. Hamadanian, Z. Tavangar, B. Noori, ”Modification of conductive properties of (10, 0) zigzag single-walled carbon nanotubes (SWCNT) by alkali metals absorption”, Journal of Molecular Structure 1076 (2014) 49-54.

58- M. Hamadanian, Z. Tavangar, B. Noori, ”Modification of the electronic properties of zigzag (n= 5–10) and armchair (n= 3, 5) carbon nanotubes by K atom adsorption”, Structural Chemistry 25 (2014) 1005-1012.

57- M. Hamadanian, M. Amani, V. Jabbari, ”Preparation of Ionomer Poly (Ethyl Vinyl Ether-Maleic Anhydride) Block Copolymer via In Situ Radical Polymerization Incorporated by ZnO and MgO Nanoparticles”, Polymer-Plastics Technology and Engineering 53 (2014) 504-512.

56- M. Hamadanian, M. Amani, V. Jabbari, ”Improving thermal and optical properties of biodegradable poly (ethyl vinyl ether-co-maleic anhydride)(PEVE/MA) copolymer by encapsulation of TiO2 nanoparticles via in situ”, Polymer-Plastics Technology and Engineering 53 (2014) 1283-1289.

55- M. Hamadanian, J. Safaei-Ghomi, M. Hosseinpour, R. Masoomi, V. Jabbari, ”Uses of new natural dye photosensitizers in fabrication of high potential dye-sensitized solar cells (DSSCs)”, Materials Science in Semiconductor Processing 27 (2014) 733-739.

54- M. Hamadanian, A. Sadeghi-Sarabi, A. Mohammadi-Mehra, V. Jabbari, ”Photocatalyst Cr-doped titanium oxide nanoparticles: Fabrication, characterization, and investigation of the effect of doping on methyl orange dye degradation”, Materials Science in Semiconductor Processing 21 (2014) 161-166.

53- A. Ehteram, M. Hamadanian, S.Z. Mirdamadian, V. Jabbari, ”Photovoltaic performance of dye-sensitized solar cell (DSSC) fabricated by silver nanoclusters-decorated TiO₂ electrode via photochemical reduction technique”, Journal of Nanostructures 4 (2014) 75-82.

52- F. Aghabozorgi, M. Hamadanian, ”Theoretical investigation of the heat of formation and detonation performance on 1, 1, 3, 5, 5-pentanitro-1, 5-bis (difluoramino)-3-azapentane substituted”, Journal of Structural Chemistry 55 (2014) 831-836.

51- M. Behpour, S.M. Ghoreishi, F. Vatani, N. Mohammadi, M. Hamadanian, M.A. Ghasemzadeh, ”The Inhibiting Effect of Some New Derivatives of Pyrimidine-2-thione on the Corrosion of Stainless Steel 304 in Sulfuric Acid Media”, Journal of Mechanical Engineering and Technology, 2 (2014) 1-11.

50- M. Hamadanian, V. Jabbari, ”Improved Conversion Efficiency in Dye-Sensitized Solar Cells Based on Electrospun TiCl4-Treated TiO₂ Nanorod Electrodes”, International journal of green energy 11 (2014) 364-375.

49- M. Hamadanian, F. Kalantary-Fotooh, ”Density functional study of Al/N co-doped (10, 0) zigzag single-walled carbon nanotubes as CO sensor”, Computational Materials Science 82 (2014) 497-502.

48- M. Behpour, A.M. Attaran, S.M. Ghoreishi, N. Mohammadi, M. Hamadanian, M. Salavati-Niasari, M. Abbasi, ”Investigation of adsorption and inhibitive properties of some diamine compounds on mild steel corrosion in hydrochloric acid solution”, Chemical Engineering Communications 201 (2014) 1077-1095.

47- M.H. Hadizadeh, M. Hamadanian, ”Adsorption of toxic gases by an open nanocone coupled with an iron atom”, Bulgarian Chemical Communications 46 (2014) 576-579.

46- M. Hamadanian, M. Shamshiri, V. Jabbari, ”Novel high potential visible-light-active photocatalyst of CNT/Mo, S-codoped TiO₂ hetero-nanostructure”, Applied Surface Science 317 (2014) 302-311.

45- M. Oftadeh, N.Madadi-Mahani, M Hamadanian, ”Density functional theory study of the local molecular properties of acetamide derivatives as anti-HIV drugs”, Research in pharmaceutical sciences 8 (2013) 285-297.

44- M. Hamadanian, A. Gravand, V. Jabbari, ”High performance dye-sensitized solar cells (DSSCs) achieved via electrophoretic technique by optimizing of photoelectrode properties”, Materials Science in Semiconductor Processing 16 (2013) 1352-1359.

43- M. Hamadanian, V. Jabbari, M. Shamshiri, M. Asad, I. Mutlay, ”Preparation of novel hetero-nanostructures and high efficient visible light-active photocatalyst using incorporation of CNT as an electron-transfer channel into the support TiO₂ and PbS”, Journal of the Taiwan Institute of Chemical Engineers 44 (2013) 748-757.

42- M. Hamadanian, M. Behpour, A.S. Razavian, V. Jabbari , ”Structural, morphological and photocatalytic characterisations of Ag-coated anatase TiO₂ fabricated by the sol–gel dip-coating method”, Journal of Experimental Nanoscience 8 (2013) 901-912.

41- M. Hamadanian, Z. Tavangar, S. Naseh, ”The structural and electronic properties of (10,0) zigzag Single-Wall Carbon Nanotubes modified by thiophene groups”, Chemical Physics Letters 584 (2013) 177-181.

40- M. Hamadanian, A. Reisi-Vanani, P. Razi, S. Hoseinifard, V. Jabbari, ”Photodeposition-assisted synthesis of novel nanoparticulate In, S-codoped TiO₂ powders with high visible light-driven photocatalytic activity”, Applied Surface Science 285 (2013) 121-129.

39- A. Akbari, M. Hamadanian, M. Bojaran, A. Yunessnia-Lehi, V. Jabbari, ”The role of solution and coagulation temperatures in crystalline structure, morphology, roughness, pore diameter distribution, and separation properties of nanoporous membranes”, Separation Science and Technology 47 (2012) 1866-1873.

38- M. Hamadanian, V. Jabbari, A. Gravand, M. Asad, "Band gap engineering of TiO₂ nanostructure-based dye solar cells (DSCs) fabricated via electrophoresis", Surface and Coatings Technology 206 (2012) 4531-4538.

37- M. Hamadanian, V. Jabbari, A. Gravand, "Dependence of energy conversion efficiency of dye-sensitized solar cells on the annealing temperature of TiO₂ nanoparticles", Materials Science in Semiconductor Processing 15 (2012) 371-379.

36- M. Hamadanian, H. Sayahi, A.R. Zolfaghari, "Modified multistep electrophoretic deposition of TiO₂ nanoparticles to prepare high quality thin films for dye-sensitized solar cell", Journal of Materials Science 47 (2012) 5845-5851.

35- M. Hamadanian, V. Jabbari, "Fabrication and characterization of dye-sensitized solar cells using electrospun TiO₂ nanofibre as a solar light harvesting layer", International Journal of Sustainable Energy 31 (2012) 277-289.

34- T. Mazoochi, M. Hamadanian, M. Ahmadi, V. Jabbari, "Investigation on the morphological characteristics of nanofiberous membrane as electrospun in the different processing parameters", International Journal of Industrial Chemistry 3(2) (2012) 1-8.

33- A. Akbari, M. Hamadanian, V. Jabbari, A. Yunessnia-Lehi, M. Bojaran, "Influence of PVDF concentration on the morphology, surface roughness, crystalline structure, and filtration separation properties of semicrystalline phase inversion polymeric membrane", Desalination and Water Treatment 46 (2012) 96-106.

32- M. Hamadanian, B. Khoshnevisan, F. Kalantary-Fotooh, Z. Tavangar, "Computational study of super cell Al-substituted single-walled carbon nanotubes as CO sensor", Computational Materials Science 58 (2012) 45-50.

31- M. Hamadanian, M. Behpour, A.S. Razavian, V. Jabbari, ” Effects of Operational Parameters on the TiO₂ and TiO₂/Ag Core-Shell Photocatalysis System for Decolorizing AR14”, World Applied Sciences Journal 14 (2011) 54-59.

30- M. Hamadanian, H. Sayahi, A.R. Zolfaghari, ”Investigating the effects of post-heat treatment temperatures on the structure of prepared nanorod by hydrothermal method”, Journal of Nanostructures 1 (2011) 237-242.

29- M. Oftadeh, B. Gholamalian, M. Hamadanian, ”Investigation of the interaction of carbon dioxide fluid with internal and external single-wall carbon nanotubes by DFT”, Journal of Nanostructures 1 (2011) 213-223.

28- M. Hamadanian, H. Sayahi, A.R. Zolfaghari, ”Effect of large TiO₂ Nanoparticles as Light Scatter in Matrix of Small Nanoparticles to Improve the Efficiency in Dye-Sensitized Solar Cell”, Journal of Nanostructures 1 (2011) 139-143.

27- M. Hamadanian, V. Jabbari, ”Investigation on the energy conversion of dye-sensitized solar cells based on TiO₂ core/shell using metal oxide as a barrier layer”, Applied Solar Energy 47 (2011) 281-288.

26- M. Hamadanian, B. Khoshnevisan and F. Kalantari Fotooh, “Density functional study of super cell N-doped (10,0) zigzag single-walled carbon nanotubes as CO sensor”, Structal Chemistry, 22 (2011) 1205-1211.

25- M. Hamadanian, A. Akbari, V. Jabbari, “Electrospun Titanium Dioxide Nanofibers: Fabrication, Properties and Its Application in Photo-Oxidative Degradation of Methyl Orange (MO)”, Fibers and Polymers, 112 (2011) 880-885.

24- M. Hamadanian, A. Reisi-Vanani, M. Behpour, A.S. Esmaeily, “Synthesis and characterization of Fe,S-codoped TiO₂ nanoparticles: Application in degradation of organic water pollutants”, Desalination, 281 (2011) 319–324.

23- M. Hamadanian, A.Sadeghi Sarabi, A. Mihammadi Mehra, V. Jabbari, “Efficient visible-light-induced photocatalytic degradation of MO on the Cr–nanocrystalline titania–S”, Applied Surface Science 257 (2011) 10639– 10644.

22- M. Oftadeh, S. Naseh, M. Hamadanian, “Electronic properties and dipole polarizability of thiophene and thiophenol derivatives via density functional theory”, Computational and Theoretical Chemistry 966 (2011) 20–25.

21- M. Oftadeh, M. Hamadanian Khozani, M. Radhoosh, M.H. Keshavarz, “DFT molecular orbital calculations of initial step in decomposition pathways of TNAZ and some of its derivatives with –F, –CN and –OCH₃ groups”, Computational and Theoretical Chemistry 964 (2011) 262–268.

20- M. Hamadanian, B. Khoshnevisan, F. Kalantari Fotooh, “Structure and electronic properties of Na-doped adamantane crystals”, Journal of Molecular Structure (THEOCHEM), 961 (2010) 48-54.

19- M. Salavati-Niasari, S.N. Mirsattari, M. Monajjemi, M. Hamadanian, “Density Functional B3LYP and B3PW91 Studies of the Properties of Four Cyclic Organodibotanes With Tetramethylene Fragments”, Journal of structure, 51 (2010) 437-443.

18- M. Hamadanian, A. Reisi-Vanani and A. Majedi, “Sol-Gel preparation and characterization of Co/TiO₂ nanoparticles: Application to the degradation of methyl orange”, Journal of Iranian Chemical Society, 7 (2010) S52-S58.

17- M. Hamadanian, A. Reisi-Vanani and A. Majedi, ‍“Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO₂ nanoparticles”, Applied Surface Science, 256 (2010) 1837–1844.

16- M. Hamadanian, A. Reisi-Vanani and A. Majedi, “Preparation and characterization of S-doped TiO₂ nanoparticles, effect of calcination temperature and evaluation of photocatalytic activity”, Materials Chemistry and Physics, 116 (2009) 376-382.

15- A. R. Ashrafi, M. Hamadanian, Z. Tavangar and H. Sabzyan, “Symmetry of A Capped Nanotube”, Digest Journal of Nanomaterials and Biostructures, 4 (2009) 319-322.

14- M. Behpour, S.M. Ghoreishi, N. Soltani, M. Salavati, M. Hamadanian and A. Gandomi, “Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution”, Corrosion Science, 50 (2008) 2172-2181.

13- A. Kahani, M. Hamadanian and O. Vandadi, “Deposition of Magnetite Nanoparticles in Activated Carbons and preparation of Magnetic Activated Carbons”, American Institute of Physisics (AIP), 929 (2007) 183-188.

12- M.R. Darafsheh, Y. Farjami, A.R. Ashrafi and M. Hamadanian, “Full non-rigid group of Sponge and Pina”, Journal of Mathematical Chemistry, 41 (2007) 315-326.

11- G.R. vakili-nezhaad, M. Hamadanian and M. Ghomashi, “Calculation of the Heat Capacities of Solid Phase Buckminster Fullerene by Using Semi-empirical methods”, International Journal of Nanoscience and Nanotechnology, 2 (2006) 9-18.

10- M. Hamadanian and A.R. Ashrafi, “On the symmetry of bis benzene chromium(0) with D₆d point group”, The Journal of the Argentine Chemical Society, 94 (2006) 47-53.

9- A.R. Ashrafi and M. Hamadanian, “Full non-rigid group Theory and Symmetry of Melamine”, Journal of the Iranian Chemical Society, 2 (2005) 135-139.

8- A. R. Ashrafi and M. Hamadanian, “Symmetry Properties of some Chemical Graphs”, Croatica Chemica Acta, 78 (2005) 159-163.

7- G. A. Moghani,  A. R. Ashrafi and M. Hamadanian, “Symmetry Properties of Tetraammine Platinum(II) with C₂v and C₄v Point Groups”, Journal of Zhejiang University Science, 6 (2005) 1087-1093.

6- A. R. Ashrafi and M. Hamadanian, “Group Theory for Tetraammine Platinum (II) with C_2v and C_4v Point Group in the Non-Rigid System”, Journal of Applied Mathematics and Computing, 14 (2004) 289-303.

5- M. Hamadanian and A. R. Ashrafi, “The Full NonRigid Group Theory for Cis- and Trans-Dichlorodiammine Platinum (II) and Trimethylamine”, Croatica Chemica Acta, 76 (2003) 305-312.

4- A. R. Ashrafi and M. Hamadanian,  “The Full NonRigid Group Theory for Tetraammine Platinum (II)”, Croatica Chemica Acta, 76 (2003) 299-303.

3- M. Hamadanian and A. R. Ashrafi, “The Full NonRigid Group Theory for Trimethylamine”, International Journal of Mathematics and Mathematical Sciences, 42 (2003) 2701-2706.

2- A. H. pakiari and M Hamadanian Khozani, “One-electron orbital Description of Doublet radical by FSGO”, J. Mol. Struct. (TheoChem), 453 (1998) 77.

1- A. Zeini-Isfahani and M. Hamadanian Khozani, “Photocatalytic reaction of aromatic alcohol by using of metal coated on dioxide titanium (IV)”, Iranian journal of chemistry and chemical engineering, 17 (1998) 20.